How to service the Steering Angle Sensor on GMC Yukon?

Begin Steering Angle Sensor service by identifying its type using provided illustrations prior to sensor removal. Customers should locate the sensor connector's front section on the adapter's right side. No centering process is needed for existing sensor use before conducting its removal. First disconnect the sensor connector then extract the sensor from its position between the adapter and bearing assembly. The sensor's reinstallation requires marking the flush rotor flange cuff area for realignment purposes since improper sensor placement can occur without proper cuff alignment. When installing new sensors they should come equipped with pins that must be retained until the sensor insertion. Keep the pin on the sensor until complete sensor insertion. Drive the sensor along the Steering Shaft before mounting it inside the adapter and bearing assembly where connection to the sensor terminals can be made. The front of the sensor contains a foam ring together with a pin hole and a flushed rotor flange cuff with an alignment mark to facilitate installation. Reinstall the sensor only if it has existing alignment marks on the flush rotor flange cuff which need to be precisely aligned before assembly. Each sensor type needs the installation process repeated while noting key features like the raised rotor flange cuff alongside its respective alignment marks for correct placement. Always check alignment before inserting the sensor into the adapter and bearing assembly because failure to do so may require a fresh sensor replacement.

OEM GMC Yukon Steering Angle Sensor

Steering Column Angle Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Steering Angle Sensors found

View related parts
GMC Yukon Position Sensor
Part Number: 13589991
$58.78 MSRP: $114.10
You Save: $55.32 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Steering Gear Hydraulic Valve; Steering Wheel Speed Sensor; Steering Angle Sensor; Angle Sensor; Steering Sensor Assembly
- Replaces: 13579709, 13589257, 13584209, 13513905
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 GMC Yukon | AT4, Denali, SLE, SLT | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Position Sensor
Part Number: 19418403
$58.84 MSRP: $100.20
You Save: $41.36 (42%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Steering Wheel Position; Steering Wheel Speed Sensor; Steering Angle Sensor; Sensor, Steering Column
- Replaces: 20910871
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2014 GMC Yukon | Denali, Denali Hybrid, Hybrid, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.2 L FLEX
View related parts
GMC Yukon Position Sensor
Part Number: 26104070
$129.89 MSRP: $254.28
You Save: $124.39 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Steering Column; Steering Wheel Speed Sensor; Steering Angle Sensor
- Replaces: 26100011
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2006 GMC Yukon | Denali, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
GMC Yukon Position Sensor
Part Number: 13590209
$71.92 MSRP: $139.58
You Save: $67.66 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Steering Gear Hydraulic Valve; Steering Wheel Speed Sensor; Steering Angle Sensor; Angle Sensor; Sensor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2020 GMC Yukon | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Position Sensor
Part Number: 26084178
Product Specifications
- Other Name: Sensor, Steering Column; Steering Wheel Speed Sensor; Steering Angle Sensor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2002 GMC Yukon | Denali, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
GMC Yukon Position Sensor
Part Number: 15886733
Product Specifications
- Other Name: Sensor, Steering Column; Steering Wheel Speed Sensor; Steering Angle Sensor
- Replaces: 15112675, 25833069
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2013 GMC Yukon | Denali, Denali Hybrid, Hybrid, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Speed Sensor
Part Number: 26064468
$72.07 MSRP: $128.70
You Save: $56.63 (44%)
Product Specifications
- Other Name: Sensor, Steering Column; Steering Wheel Speed Sensor; Steering Angle Sensor; Position Sensor; Sensor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2000 GMC Yukon | Base, Denali, SL, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
GMC Yukon Position Sensor
Part Number: 26091590
Product Specifications
- Other Name: Sensor Kit, Steering; Steering Wheel Speed Sensor; Sensor
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002 GMC Yukon | Denali, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

GMC Yukon Steering Angle Sensor

Our website offers an extensive catalog of genuine GMC Yukon Steering Angle Sensor at unbeatable prices. Every OEM GMC Yukon Steering Angle Sensor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

GMC Yukon Steering Angle Sensor Parts Questions & Experts Answers

Position Sensor
15886733
Q: How to service the Steering Angle Sensor on GMC Yukon?
A: Begin Steering Angle Sensor service by identifying its type using provided illustrations prior to sensor removal. Customers should locate the sensor connector's front section on the adapter's right side. No centering process is needed for existing sensor use before conducting its removal. First disconnect the sensor connector then extract the sensor from its position between the adapter and bearing assembly. The sensor's reinstallation requires marking the flush rotor flange cuff area for realignment purposes since improper sensor placement can occur without proper cuff alignment. When installing new sensors they should come equipped with pins that must be retained until the sensor insertion. Keep the pin on the sensor until complete sensor insertion. Drive the sensor along the Steering Shaft before mounting it inside the adapter and bearing assembly where connection to the sensor terminals can be made. The front of the sensor contains a foam ring together with a pin hole and a flushed rotor flange cuff with an alignment mark to facilitate installation. Reinstall the sensor only if it has existing alignment marks on the flush rotor flange cuff which need to be precisely aligned before assembly. Each sensor type needs the installation process repeated while noting key features like the raised rotor flange cuff alongside its respective alignment marks for correct placement. Always check alignment before inserting the sensor into the adapter and bearing assembly because failure to do so may require a fresh sensor replacement.