Make sure this part fits

GM 88951003
Buckle End

2002-2005 GM

Customer Questions & Expert Answers (11)
GM 88951003 Buckle End
  • Part Description
    Belt Kit, Passenger Seat (Buckle Side) *Graphite
  • Position
    Passenger Side
  • Replaced By
    19419329
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number88951003
    Part DescriptionBelt Kit, Passenger Seat (Buckle Side) *Graphite
    Other NamesOuter Buckle; Buckle; Latch
    Item Dimensions14.9 x 4.5 x 4.5 inches
    Item Weight1.00 Pounds
    PositionPassenger Side
    ConditionNew
    ManufacturerGeneral Motors
    SKU88951003
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2005 Chevrolet BlazerBase, LS, Xtreme, ZR26 Cyl 4.3 L GAS
    2002-2004 Chevrolet S10Base, LS, Xtreme, ZR2, ZR54 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    2002-2004 GMC SonomaSL, SLS4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    2002-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is 88951003 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 88951003 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done if there is doubt about the condition of the seat belt system for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    It should be replaced, including all components related to adult seat belts, built-in child restraints, and LATCH systems.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What should be done after securing the seat belt retractor assembly for the 2005 Chevrolet Blazer? Posted by Customer
    A:
    Guide the seat belt through the opening in the body side trim panel, then reinstall the body side trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    How do you begin the installation process for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    Start by placing the seat belt retractor assembly back into the vehicle and securing it with the bolt, tightening it to 70 N.m (52 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What is the torque specification for tightening the retaining bolt for the 2003 Chevrolet S10? Posted by Customer
    A:
    Tighten it to 55 N.m (41 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What should be done after securing the seat belt retractor assembly for the 2004 Chevrolet S10? Posted by Customer
    A:
    Guide the seat belt through the opening in the body side trim cover, reinstall the body side trim panel, and attach the upper seat belt anchor plate with its bolt, also tightening it to 70 N.m (52 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What is the next step after removing the rear seat bottom cushion for the 2003 Chevrolet S10? Posted by Customer
    A:
    Take out the center rear seat belt assembly retaining nuts and the assembly itself from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What is the final step in the process for the 2002 Chevrolet S10? Posted by Customer
    A:
    Install the rear seat bottom cushion ear retainers into the rear seat back mounting bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What is the torque specification for tightening the retaining nuts for the 2002 Chevrolet S10? Posted by Customer
    A:
    Tighten the retaining nuts to 80 N.m (59 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What should be done after securing the seat belt retractor assembly for the 2004 GMC Sonoma? Posted by Customer
    A:
    Guide the seat belt through the opening in the body side trim cover, reinstall the body side trim panel, and firmly press the seat belt opening trim cover into place.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What should be done after removing the upper seat belt anchor plate for the 2003 GMC Sonoma? Posted by Customer
    A:
    Remove the body side trim panel and guide the seat belt through the opening in the body side trim cover.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 88951003, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 88951003 Buckle End. It is sometimes referred to as GM Seat Belt. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 88951003 Buckle End. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery