Make sure this part fits

GM 25749802
Strut Bracket

2006-2011 GM

Customer Questions & Expert Answers (20)
GM 25749802 Strut Bracket
  • Part Description
    Bracket-Engine Mount Strut Engine Side; Engine Mount Bracket; Motor Mount
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2006-2011 Buick LucerneCXL, CXS, Super8 Cyl 4.6 L GAS
    2006-2011 Cadillac DTSBase, Livery, Luxury, Platinum, Premium8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25749802 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25749802 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How should the engine mount bracket bolts be installed for the 2007 Buick Lucerne? Posted by Customer
    A:
    Install the engine mount bracket bolts, tightening them to 70 N.m (52 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What should be done after removing the engine mount for the 2006 Buick Lucerne? Posted by Customer
    A:
    Remove the engine mount bracket bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What should be done after lowering the transaxle for the 2007 Buick Lucerne? Posted by Customer
    A:
    Install the engine mount to frame nut and tighten it to 80 N.m (59 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be done after removing the engine mount for the 2008 Buick Lucerne? Posted by Customer
    A:
    Install the new engine mount into the engine bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the first step to replace the engine front mount for the 2007 Buick Lucerne? Posted by Customer
    A:
    Remove the front air deflector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be done after positioning the engine mount bracket for the 2006 Buick Lucerne? Posted by Customer
    A:
    Install the engine mount bracket bolts and tighten them to 70 Nm (52 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What should be done after tightening the engine mount to bracket nut for the 2006 Buick Lucerne? Posted by Customer
    A:
    Lower the transaxle with the adjustable jack.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be removed after the front engine mount for the 2006 Cadillac DTS? Posted by Customer
    A:
    Remove the engine mount bracket to cylinder head bolts and the upper engine mount bracket to lower engine mount bracket nuts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What is the final step in the process for the 2008 Cadillac DTS? Posted by Customer
    A:
    Finally, install the frame.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the first step to replace the right engine mount for the 2009 Cadillac DTS? Posted by Customer
    A:
    Remove the frame.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the next step after removing the nut for the 2010 Cadillac DTS? Posted by Customer
    A:
    Take out the front engine mount.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the first step to replace the right engine mount bracket for the 2007 Cadillac DTS? Posted by Customer
    A:
    First, remove the right engine mount.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    How should the engine mount bracket to cylinder head bolts be secured for the 2009 Cadillac DTS? Posted by Customer
    A:
    Tighten them to 50 Nm (37 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    How do you attach the right engine mount bracket for the 2009 Cadillac DTS? Posted by Customer
    A:
    Attach the right engine mount bracket to the engine stud and tighten the bolts/stud to 73 Nm (54 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What is the first step in the installation process for the 2006 Cadillac DTS? Posted by Customer
    A:
    Insert the front engine mount stud through the hole in the front engine mount bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the final step after tightening the bolts/stud for the 2008 Cadillac DTS? Posted by Customer
    A:
    Reinstall the right engine mount.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What should be exercised caution regarding during installation for the 2010 Cadillac DTS? Posted by Customer
    A:
    Exercise caution regarding fasteners to avoid vehicle damage.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What precautions should be taken during installation for the 2009 Cadillac DTS? Posted by Customer
    A:
    Ensure to follow fastener precautions to avoid vehicle damage.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the final step in the process for the 2007 Cadillac DTS? Posted by Customer
    A:
    Finally, install the frame.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Strut Bracket 25749802 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25749802 Strut Bracket is available in the market under the name GM Engine Mount, Engine Mount Bracket. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25749802 Strut Bracket fits certain Cadillac DTS models, as well as Buick Lucerne models.
The original GM component designated by manufacturer part number 25749802 maintains top performance when functioning as the Bracket-Engine Mount Strut Engine Side; Engine Mount Bracket; Motor Mount unit. The component 25749802 is constructed from durable material and its dimensions span 11.1 x 4.4 x 2.5 inches while weighing 2.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Strut Mount Bracket; Bracket, Engine Mounting. The part 25749802 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.