Make sure this part fits

GM 25756322
Mount Bracket, Passenger Side

2004-2011 GM

Customer Questions & Expert Answers (36)
GM 25756322 Mount Bracket, Passenger Side
  • Part Description
    Bracket, Engine Mounting
  • Position
    Passenger Side
  • Replaced By
    10360744
  • Manufacturer
    General Motors
Make sure this part fits
$8.30 MSRP: $13.00
You Save: $4.70 (37%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2009 Cadillac SRXBase6 Cyl 3.6 L GAS
    2005-2011 Cadillac STSBase, Platinum6 Cyl 3.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25756322 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25756322 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be removed next after supporting the oil pan for the 2006 Cadillac SRX? Posted by Customer
    A:
    Remove the right engine mount upper retaining nut and the right engine mount bracket mounting bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What should be installed under the oil pan for support for the 2007 Cadillac STS? Posted by Customer
    A:
    Install a screw jack with a block of wood.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What should be done after raising the 2004 Cadillac SRX? Posted by Customer
    A:
    Remove the lower engine mount retaining nut and raise the engine using the screw jack until the weight is off the mount.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What should be removed after supporting the 2008 Cadillac SRX? Posted by Customer
    A:
    The lower engine mount retaining nut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be removed after raising for the 2008 Cadillac SRX? Posted by Customer
    A:
    The exhaust system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the first step to replace the left engine mount bracket for the 2005 Cadillac SRX? Posted by Customer
    A:
    Raise and support the vehicle, then install a screw jack with a block of wood under the oil pan for support.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What is the final step after installing the engine mount for the 2004 Cadillac SRX? Posted by Customer
    A:
    Reinstall the right engine mount bracket and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the next step after supporting the oil pan for the 2005 Cadillac STS? Posted by Customer
    A:
    Remove the right engine mount upper retaining nut without distorting or bending the engine mount heat shield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What is the final step after completing the installation for the 2009 Cadillac SRX? Posted by Customer
    A:
    Reattach the transmission vent hose to the retainers, remove the transmission jack, reinstall the exhaust system, and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What bolts need to be removed next for the 2007 Cadillac SRX? Posted by Customer
    A:
    Remove the transmission mount support to body mounting bolts and the transmission mount support to transfer case mounting bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the next step after removing the right engine mount bracket for the 2005 Cadillac STS? Posted by Customer
    A:
    Remove the engine mount retaining nut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be removed after raising for the 2007 Cadillac SRX? Posted by Customer
    A:
    Remove the right exhaust manifold.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What bolts need to be removed after supporting the transmission for the 2005 Cadillac SRX? Posted by Customer
    A:
    The transmission support to body mounting bolts and the transmission to support mounting bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the first step to replace the right side engine mount for the 2008 Cadillac STS? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What conditions should be observed that necessitate replacement of the transmission mount for the 2004 Cadillac SRX? Posted by Customer
    A:
    The hard rubber surface shows heat check cracks, the rubber is separated from the metal plate, or the rubber is split through the center.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the final step in the process for the 2006 Cadillac STS? Posted by Customer
    A:
    Remove the transmission jack, reinstall the exhaust system, and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What should be done after installing the engine mount for the 2008 Cadillac SRX? Posted by Customer
    A:
    Install the upper engine mount retaining nut and tighten it to 80 N.m (59 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What is the final step in the process for the 2008 Cadillac STS? Posted by Customer
    A:
    Install the engine mount lower retaining nut, tightening it to 80 N.m (59 lb ft), and remove the engine support fixture.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What is the procedure for tightening the transmission mount support to transfer case mounting bolts for the 2007 Cadillac STS? Posted by Customer
    A:
    Hand-tighten the bolts, then tighten the left side bolt to 110 N.m (81 lb ft) and the right side bolt to 110 N.m (81 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the next step after securing the engine mount for the 2009 Cadillac SRX? Posted by Customer
    A:
    Lower the engine using the screw jack until the weight is resting on the mount.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What is the first step to replace the left side engine mount (RWD) for the 2008 Cadillac STS? Posted by Customer
    A:
    Discharge the air conditioning (A/C) system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be installed after lowering the engine for the 2009 Cadillac SRX? Posted by Customer
    A:
    The lower retaining nut, also tightening it to 80 Nm (59 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    How do you relieve the weight off the engine mount for the 2004 Cadillac SRX? Posted by Customer
    A:
    Raise the engine using the screw jack.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the first step to replace the right side engine mount bracket for the 2008 Cadillac SRX? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What is the final step in the process for the 2005 Cadillac SRX? Posted by Customer
    A:
    Lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    How should the transmission mount bolts be tightened for the 2008 Cadillac STS? Posted by Customer
    A:
    In the correct order.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is done after removing the upper engine mount retaining nut for the 2006 Cadillac SRX? Posted by Customer
    A:
    Take out the engine mount from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the first step to replace the right engine mount for the 2007 Cadillac SRX? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be ensured while removing the upper retaining nut for the 2006 Cadillac STS? Posted by Customer
    A:
    Ensure not to distort or bend the engine mount heat shield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What do you do after removing the engine mount retaining nut for the 2007 Cadillac STS? Posted by Customer
    A:
    Take out the engine mount from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be removed after raising for the 2006 Cadillac STS? Posted by Customer
    A:
    Remove the left engine mount bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be done after tightening the transmission mount support to transfer case mounting bolts for the 2010 Cadillac STS? Posted by Customer
    A:
    Install the transmission mount support to body mounting bolts and tighten them to 60 Nm (44 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What should be done after tightening the transmission mount assembly bolts for the 2009 Cadillac SRX? Posted by Customer
    A:
    Install the transmission mount to body mounting bolts and tighten them to 60 Nm (44 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What should be removed after raising for the 2005 Cadillac STS? Posted by Customer
    A:
    Remove the right exhaust manifold.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What should you do if there is movement between the metal plate of the transmission/transaxle mount and its attaching points for the 2005 Cadillac STS? Posted by Customer
    A:
    Lower the transmission/transaxle and tighten the bolts or nuts attaching the transmission/transaxle mount to the frame or transmission/transaxle mount bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Mount Bracket, Passenger Side 25756322 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25756322 Mount Bracket, Passenger Side is available in the market under the name GM Engine Mount, Motor And Transmission Mount, Engine Mount Bracket. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25756322 Mount Bracket, Passenger Side fits certain Cadillac SRX, STS models.
The original GM component designated by manufacturer part number 25756322 maintains top performance when functioning as the Bracket, Engine Mounting unit at its Passenger Side. The component 25756322 is constructed from durable material and its dimensions span 7.7 x 4.9 x 4.1 inches while weighing 1.90 Pounds. The component is ready in New condition to ensure full compatibility with your vehicle system. The part 25756322 has available replacement options listed under 10360744. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.