Make sure this part fits

GM 10328743
Mount Bracket, Passenger Side

2003-2009 GM

Customer Questions & Expert Answers (13)
GM 10328743 Mount Bracket, Passenger Side
  • Part Description
    Bracket, Exhaust Muffler/Resonator; Exhaust Insulator; Exhaust Bracket; Exhaust Hanger
  • Position
    Passenger Side
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2005 Buick CenturyCustom, Limited, Special Edition6 Cyl 3.1 L GAS
    2005-2009 Buick LaCrosseCXS, Super6 Cyl 3.6 L GAS, 8 Cyl 5.3 L GAS
    2003-2004 Buick RegalGS, LS6 Cyl 3.8 L GAS
    2003-2007 Chevrolet Monte CarloLS, LS Competition, LS Sport, LT, LTZ, SS, SS High Sport, SS Pace Car6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
    2004-2008 Pontiac Grand PrixBase, GT, GT1, GT2, GTP6 Cyl 3.8 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 10328743 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10328743 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the exhaust hanger on Buick Century? Posted by Customer
    A:
    Replacing the Exhaust Hanger requires vehicle elevation and supporting the exhaust system before starting. Start by removing the Exhaust Pipe hanger from both its placement on the Exhaust Pipe and the exhaust bracket and after that detach the Exhaust Pipe rear hangers from the Muffler and the rear exhaust bracket. Start by joining the Exhaust Pipe rear hangers to the Muffler while bringing the rear Exhaust Hanger brackets together and proceeding with attaching the Exhaust Pipe hanger to the Exhaust Pipe along with the Exhaust Hanger bracket. Reinstall the Exhaust Pipe hanger to the Exhaust Pipe as well as the Exhaust Hanger bracket , remove the support from the exhaust system and check for underbody contact and finally lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after installing the 3-way catalytic converter pipe hangers for the 2008 Buick LaCrosse? Posted by Customer
    A:
    Remove the support from the exhaust system and the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Hanger
    Q:
    What is the final step after reinstalling the exhaust components for the 2005 Buick LaCrosse? Posted by Customer
    A:
    Remove the support from the exhaust system, inspect for underbody contact, and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Hanger
    Q:
    What is the next step for installation for the 2006 Buick LaCrosse? Posted by Customer
    A:
    Install the 3-way catalytic converter pipe hangers.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Hanger
    Q:
    What is the next step after installing the exhaust pipe hanger for the 2006 Buick LaCrosse? Posted by Customer
    A:
    Install the exhaust pipe hanger to the exhaust pipe and the exhaust hanger bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Hanger
    Q:
    What should be connected after attaching the rear hangers for the 2007 Buick LaCrosse? Posted by Customer
    A:
    Connect the exhaust pipe hanger to the exhaust pipe and the exhaust hanger bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Hanger
    Q:
    What is the first step to service and repair the exhaust system insulator, hanger, and bracket for the 2008 Buick LaCrosse? Posted by Customer
    A:
    First, raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Hanger
    Q:
    What should be done before lowering for the 2003 Buick Century? Posted by Customer
    A:
    Finally, inspect the exhaust system for any underbody contact.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Hanger
    Q:
    What bolts need to be loosened and removed before taking out the exhaust muffler rear hanger bracket for the 2003 Buick Regal? Posted by Customer
    A:
    Loosen the outboard rear bumper impact bar bolt and remove the inboard rear bumper impact bar bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Hanger
    Q:
    What should be connected after attaching the rear hangers for the 2003 Buick Regal? Posted by Customer
    A:
    Connect the exhaust pipe hanger to the exhaust pipe and the exhaust hanger bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Hanger
    Q:
    What is the next step after supporting the exhaust system for the 2004 Chevrolet Monte Carlo? Posted by Customer
    A:
    Remove the 3-way catalytic converter pipe hangers.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Hanger
    Q:
    What bolts need to be loosened and removed before taking out the exhaust muffler rear hanger bracket for the 2003 Chevrolet Monte Carlo? Posted by Customer
    A:
    Loosen the outboard rear bumper impact bar bolt and remove the inboard rear bumper impact bar bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Hanger
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Mount Bracket, Passenger Side 10328743 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 10328743 Mount Bracket, Passenger Side is available in the market under the name GM Exhaust Hanger. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 10328743 Mount Bracket, Passenger Side fits certain Chevrolet Monte Carlo models, as well as Buick Regal, LaCrosse, Century. Additionally, it is compatible with Pontiac Grand Prix models.
The original GM component designated by manufacturer part number 10328743 maintains top performance when functioning as the Bracket, Exhaust Muffler/Resonator; Exhaust Insulator; Exhaust Bracket; Exhaust Hanger unit at its Passenger Side. The component 10328743 is constructed from durable material and its dimensions span 8.0 x 3.7 x 2.5 inches while weighing 0.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Muffler & Pipe Rear Bracket; Muffler & Pipe Insulator; Muffler & Pipe Bracket; Muffler & Pipe Hanger; Hanger. The part 10328743 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.