Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 88964427
Caliper Mount

2002-2006 GM

Customer Questions & Expert Answers (8)
GM 88964427 Caliper Mount
  • Part Description
    Bracket, Front Brake Caliper
  • Position
    Front
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits

  • 88964427 Caliper Mount is Ref No. 4 in the diagram below

    2002 Chevy Trailblazer EXT Caliper Mount Diagram for 88964427
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 88964427

  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2005 Buick RainierCXL, CXL Plus8 Cyl 5.3 L GAS
    2003-2006 Chevrolet SSRBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2005 Chevrolet Trailblazer EXTLS, LT, North Face6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2005 GMC Envoy XLDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2004-2005 GMC Envoy XUVSLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is 88964427 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 88964427 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front brake caliper bracket on Buick Rainier? Posted by Customer
    A:
    You must lift the car and unmount the tire and wheel before beginning front Brake Caliper Bracket replacement work. The brake caliper assembly needs support with heavy mechanic's wire or equivalent to handle its mount separation from the Brake Caliper Bracket when the hydraulic flexible brake hose stays connected to prevent damage and brake fluid leaks. Position the front brake caliper assembly on the side for inspection before removing brake pads from their bracket while marking the inboard pad. Examine the brake hardware before removing the mounting bracket's Brake Pad retaining clips. First remove the retaining bolts of the caliper mounting bracket then uninstall the bracket before extracting the seals from around the guide pins. A visual inspection of the brake rotor must happen before you install the new mounting bracket guide pin seals. Guide pins and Brake Pad retaining clips need cleaning with denatured alcohol before receiving non-lubricated filtered air drying. High temperature silicone brake lubricant should be applied to the guide pins of the brake caliper while skipping the Brake Pad retaining clips entirely. Install the brake caliper mounting bracket and its bolts then torque them to 150 nm (110 ft. Lbs.). Install the rear Brake Pad hardware onto the bracket structure then secure the brake pads in position. Replace the brake caliper assembly followed by the tire and wheel assembly then drop the vehicle. A firm brake pedal stands to be achieved when you follow brake pedal pumping with slow firm movements for pad bracket seating.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after removing the brake pad retaining clips for the 2004 Buick Rainier? Posted by Customer
    A:
    Take out the brake caliper mounting bracket retaining bolts and the mounting bracket itself, followed by the guide pin seals from the bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Caliper Bracket
    Q:
    What is the first step to replace the front brake caliper bracket for the 2006 Chevrolet SSR? Posted by Customer
    A:
    Raise the vehicle and remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Caliper Bracket
    Q:
    What is the final step in the process for the 2004 Chevrolet SSR? Posted by Customer
    A:
    Put the tire and wheel assembly back on, lower the vehicle, and pump the brake pedal slowly and firmly to seat the brake pads.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Caliper Bracket
    Q:
    What should be attached to the brake caliper mounting bracket after installation for the 2003 Chevrolet SSR? Posted by Customer
    A:
    Attach the front brake pad hardware, followed by the brake pads.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Caliper Bracket
    Q:
    What is the final step before moving for the 2005 Chevrolet SSR? Posted by Customer
    A:
    Reinstall the brake caliper assembly, put the tire and wheel assembly back on, lower the vehicle, and ensure a firm brake pedal is obtained.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Caliper Bracket
    Q:
    What is the final step in the process for the 2003 Chevrolet SSR? Posted by Customer
    A:
    Reinstall the rear brake caliper assembly, put the tire and wheel assembly back on, lower the vehicle, and pump the brake pedal slowly and firmly to seat the brake pads.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Caliper Bracket
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Caliper Mount 88964427 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 88964427 Caliper Mount is available in the market under the name GM Brake Caliper Bracket. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 88964427 Caliper Mount fits certain Chevrolet SSR, Trailblazer EXT models, as well as GMC Envoy XL, Envoy XUV. Additionally, it is compatible with Buick Rainier models.
The original GM component designated by manufacturer part number 88964427 maintains top performance when functioning as the Bracket, Front Brake Caliper unit at its Front. The component 88964427 is constructed from durable material and its dimensions span 14.2 x 13.4 x 5.0 inches while weighing 5.20 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Bracket, Wheel Brake Cylinder/Caliper. The part 88964427 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.