Make sure this part fits

GM 15178838
Intermediate Cable

2005-2010 GM

Customer Questions & Expert Answers (18)
GM 15178838 Intermediate Cable
  • Part Description
    Cable Assembly-Parking Brake Intermediate; Brake Cable
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2008-2010, 2005-2006 Chevrolet Silverado 1500Base, Hybrid, LS, LT, LTZ, SS, WT, XFE6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
    2007 Chevrolet Silverado 1500 ClassicHybrid, LS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    2008-2010, 2005-2006 GMC Sierra 1500Base, Denali, Hybrid, SL, SLE, SLT, WT, XFE6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2007 GMC Sierra 1500 ClassicDenali, Hybrid, SL, SLE, SLT, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006 GMC Sierra 1500 HDSLE, SLT8 Cyl 6.0 L GAS
    2007 GMC Sierra 1500 HD ClassicSLE, SLT8 Cyl 6.0 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15178838 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15178838 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What needs to be removed to disconnect the park brake cable for the 2010 Chevrolet Silverado 1500? Posted by Customer
    A:
    Remove the park brake cable clip bolt and disconnect the park brake cable eye from the park brake actuator lever.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Cable
    Q:
    What is the final step before lowering for the 2005 Chevrolet Silverado 1500? Posted by Customer
    A:
    Place the right cable over the clip on top of the rear axle housing, thread the park brake cable through the frame bracket and guides, and connect the right park brake cable to the equalizer before lowering the vehicle and adjusting the park brakes.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Cable
    Q:
    What is the next step after removing the park brake cables for the 2006 Chevrolet Silverado 1500? Posted by Customer
    A:
    Disconnect the intermediate cable from the front cable and remove the intermediate cable from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Cable
    Q:
    How do you relieve the tension from the park brake cable for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Pull down on the park brake cable in front of the equalizer and remove the right park brake cable from the equalizer bar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Cable
    Q:
    What is the first step to replace the Parking Brake Intermediate Cable for the 2009 Chevrolet Silverado 1500? Posted by Customer
    A:
    First, release the park brake and disable the park brake cable automatic adjuster.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Cable
    Q:
    What should be done after disconnecting the front park brake cable for the 2010 Chevrolet Silverado 1500? Posted by Customer
    A:
    Repeat the process for the left park brake cable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Cable
    Q:
    How do you connect the park brake cable after installation for the 2008 Chevrolet Silverado 1500? Posted by Customer
    A:
    Connect the park brake cable to the rear axle housing cover clip, install the park brake cable into the cable guides, and connect the right rear park brake cable to the intermediate cable equalizer bar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Cable
    Q:
    What is the procedure for 25/35 series regarding the park brake cable for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Disable the park brake cable automatic adjuster, then disconnect the intermediate cable from the rear park brake cable and the front cable before removing the intermediate cable from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Cable
    Q:
    How do you disconnect the front park brake cable from the intermediate cable connector for the 2008 GMC Sierra 1500? Posted by Customer
    A:
    Drill a 3 mm (1/8 in) hole through the dimple in the front to intermediate park brake cable connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Cable
    Q:
    How do you connect the left rear park brake cable for the 2009 GMC Sierra 1500? Posted by Customer
    A:
    Connect the left rear park brake cable to the intermediate cable equalizer bar and insert the park brake cable conduit into the frame bracket, ensuring the locking tabs are fully engaged.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Cable
    Q:
    What should be done after securing the cable to the mounting bracket for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    Connect the cable at the equalizer for 25/35 series vehicles and enable the park brake cable automatic adjuster.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Cable
    Q:
    What is the torque specification for the rear park brake cable bracket bolt for the 2005 GMC Sierra 1500? Posted by Customer
    A:
    Tighten it to 61 Nm (45 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Cable
    Q:
    What is the final step after installation for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Lower the vehicle and adjust the park brake as necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Cable
    Q:
    What is the final step after completing the installation for the 2010 GMC Sierra 1500? Posted by Customer
    A:
    Enable the park brake cable automatic adjuster and adjust the park brake as necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Cable
    Q:
    What should you do after routing the cable for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Engage the grommet.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Cable
    Q:
    What is the first step to replace the park brake cable on rear disc brakes for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    First, release the park brake and raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Cable
    Q:
    What should be done after installing the park brake cable clip bolt for the 2008 GMC Sierra 1500? Posted by Customer
    A:
    Tighten it to 22 N.m (16 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Cable
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Intermediate Cable 15178838 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15178838 Intermediate Cable is available in the market under the name GM Parking Brake Cable. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15178838 Intermediate Cable fits certain Chevrolet Silverado 1500, Silverado 1500 Classic, Silverado 1500 HD models, as well as GMC Sierra 1500, Sierra 1500 Classic, Sierra 1500 HD models.
The original GM component designated by manufacturer part number 15178838 maintains top performance when functioning as the Cable Assembly-Parking Brake Intermediate; Brake Cable unit. The component 15178838 is constructed from durable material and its dimensions span 13.9 x 13.4 x 3.3 inches while weighing 0.80 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Cable, Parking Brake. The part 15178838 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.