Make sure this part fits

GM 25850288
Positive Cable

2007-2012 GM

Customer Questions & Expert Answers (4)
GM 25850288 Positive Cable
GM 25850288 Positive Cable
  • Part Description
    Cable, Battery (Positive); Battery Cables
  • Manufacturer
    General Motors
Make sure this part fits
$79.35 MSRP: $173.24
You Save: $93.89 (55%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2008-2012 Chevrolet MalibuClassic LS, Classic LT, LS, LT, LTZ4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
    2008-2010 Pontiac G6Base, GT4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    2007-2009 Saturn AuraXE, XR4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25850288 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25850288 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the negative battery cable on Chevrolet Malibu? Posted by Customer
    A:
    First unfasten the negative Battery Cable and remove the ground nut from the engine block stud before taking off the ground lead from the same stud. The procedure starts with nut removal from the tie bar stud and lead removal from the same stud. First disconnect the body wiring harness electrical connector from the battery current sensor while cutting tape that secures the negative Battery Cable to the positive cable. Make a note of the negative cable assembly route before disassembly. Take the negative Battery Cable assembly off the vehicle and place it on a sterile work area for safe storage. Record the measurement between the negative Battery Cable end and the current sensor spot for installation purposes. Pull out the battery current sensor from its position on the negative Battery Cable. Position the battery current sensor on the new negative Battery Cable and push it toward the marked installation position. Attach the new negative Battery Cable near the positive Battery Cable while using fresh tape for attachment. Connect the body wiring harness electrical connector to the battery current sensor before securing the ground lead at the tie bar stud. Tighten the ground nut to a torque of 10 n.m (89 lb in). Screw the ground lead onto the engine block stud while tightening the ground nut to 10 n.m (89 lb in). The negative Battery Cable needs to be connected as the final step.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you open the positive battery cable cover for the 2008 Chevrolet Malibu? Posted by Customer
    A:
    Open the positive battery cable cover by disengaging the two side retaining tabs.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    How should the positive battery cable nut be secured to the starter solenoid for the 2009 Chevrolet Malibu? Posted by Customer
    A:
    Install the positive battery cable nut to the starter solenoid and tighten it to 10 Nm (89 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Positive Cable 25850288 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25850288 Positive Cable is available in the market under the name GM Battery Cable. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25850288 Positive Cable fits certain Chevrolet Malibu models, as well as Pontiac G6. Additionally, it is compatible with Saturn Aura models.
The original GM component designated by manufacturer part number 25850288 maintains top performance when functioning as the Cable, Battery (Positive); Battery Cables unit. The component 25850288 is constructed from durable material and its dimensions span 4.2 x 12.5 x 10.5 inches while weighing 1.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Cable, Battery(Positive). The part 25850288 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.