Make sure this part fits

GM 88964173
Caliper

2005-2008 GM

Customer Questions & Expert Answers (9)
GM 88964173 Caliper
  • Part Description
    Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
  • Position
    Front
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number88964173
    Part DescriptionCaliper, Wheel Brake Cylinder/Caliper; Brake Caliper
    Item Dimensions8.0 x 9.0 x 6.7 inches
    Item Weight8.60 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU88964173
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2007 Buick TerrazaCX, CXL6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2005-2008 Chevrolet UplanderBase, LS, LT6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2005-2006 Pontiac MontanaSV66 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    2005-2007 Saturn Relay1, 2, 36 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is 88964173 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 88964173 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How should the interior of the caliper housing be prepared during piston removal for the 2005 Buick Terraza? Posted by Customer
    A:
    Use clean cloths to pad the interior of the caliper housing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    Why should care be taken when applying compressed air to the caliper piston(s) for the 2006 Buick Terraza? Posted by Customer
    A:
    The piston(s) can be ejected forcefully, posing a risk of injury.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    How do you install the brake caliper for the 2007 Buick Terraza? Posted by Customer
    A:
    Install the brake caliper onto the caliper bracket, ensuring the guide boots are undamaged, and tighten the brake caliper bolts to 34 N.m (25 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be done after inspecting the fluid level for the 2005 Buick Terraza? Posted by Customer
    A:
    Raise and support the vehicle, then remove the tire and wheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should you do to prevent fluid loss and contamination for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    Plug the openings in the brake caliper and the brake hose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the procedure to bleed the brake system for the 2005 Chevrolet Uplander? Posted by Customer
    A:
    Gradually apply the brake pedal to approximately 2/3 of its travel distance with the engine off, slowly release it, and repeat until a firm brake pedal is obtained.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What are the final steps after seating the brake components for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    Adjust the park brake system, install the tire and wheel assembly, and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be done after attaching the caliper for the 2006 Chevrolet Uplander? Posted by Customer
    A:
    Remove the plugs in the brake hose end, install new copper brake hose gaskets, and assemble the brake hose bolt with the new gaskets to the brake hose, tightening the bolt to 54 Nm (40 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 88964173, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 88964173 Caliper. It is sometimes referred to as GM Brake Caliper Repair Kit, GM Brake Calipers. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 88964173 Caliper. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery