Make sure this part fits

GM 18029813
Overhaul Kit, Front

1997-2005 GM

Customer Questions & Expert Answers (10)
GM 18029813 Overhaul Kit, Front
  • Part Description
    Caliper Kit, Front Brake; Brake Caliper Repair Kit; Disc Brake Hardware Kit
  • Position
    Front
  • Manufacturer
    General Motors
Make sure this part fits
$10.19 MSRP: $23.36
You Save: $13.17 (57%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    1997-2005 Chevrolet BlazerBase, LS, LT, Trailblazer, Xtreme, ZR26 Cyl 4.3 L GAS
    1997-2004 Chevrolet S10Base, LS, Xtreme, ZR2, ZR54 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    1997-2001 GMC JimmyDiamond Edition, Envoy, SL, SLE, SLS, SLT6 Cyl 4.3 L GAS
    1997-2004 GMC SonomaSL, SLE, SLS4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    1997-2001 Oldsmobile BravadaBase6 Cyl 4.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 18029813 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 18029813 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How should corrosion be cleaned from the brake caliper bore for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    Using a crocus cloth and drying the parts with non-lubricated, filtered compressed air.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the final step after overhauling the brake caliper for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    Install the brake caliper back onto the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should always be used for the brake hose bolt for the 2002 Chevrolet S10? Posted by Customer
    A:
    Always use new washers for the brake hose bolt and do not reuse old ones.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the final step in the process for the 2002 Chevrolet S10? Posted by Customer
    A:
    Bleed the hydraulic brake system, reinstall the tire and wheel assembly, and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What safety precaution should be taken during the process for the 2002 Chevrolet S10? Posted by Customer
    A:
    Caution is advised regarding eye protection.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the next step after raising the 2001 GMC Jimmy? Posted by Customer
    A:
    Remove the tire and wheel assembly and inspect the caliper operation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the lubrication process during installation for the 2001 GMC Jimmy? Posted by Customer
    A:
    Lubricate the sleeves and new bushings with Delco Silicone Lube (GM P/N 18010909) or equivalent, then install the new rubber O-ring bushings to the caliper and the caliper mounting bolt sleeves.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the next step after removing the boots and piston seals for the 2000 GMC Jimmy? Posted by Customer
    A:
    Remove the bleeder valve cap and the bleeder valve from the caliper housing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be done after installing the brake caliper mounting bolts for the 2003 GMC Sonoma? Posted by Customer
    A:
    Install the front brake hose fitting with 2 new gaskets and the brake hose fitting bolt, tightening it to 54 Nm (40 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Overhaul Kit, Front 18029813 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 18029813 Overhaul Kit, Front is available in the market under the name GM Brake Calipers. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 18029813 Overhaul Kit, Front fits certain Chevrolet S10, Blazer models, as well as GMC Sonoma, Jimmy. Additionally, it is compatible with Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 18029813 maintains top performance when functioning as the Caliper Kit, Front Brake; Brake Caliper Repair Kit; Disc Brake Hardware Kit unit at its Front. The component 18029813 is constructed from durable material and its dimensions span 2.6 x 2.5 x 1.1 inches while weighing 0.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Caliper Kit, Wheel Brake Cylinder/Caliper. The part 18029813 has available replacement options. Each vehicle needs 2 units of the part marked as SKU 18029813. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.