Make sure this part fits

GM 15002591
Pressure Plate

Name: GM 15002591
Brand: GM
SKU: 15002591
Price: 260.35 USD
Availability: Discontinued

1998-2000 GM

Customer Questions & Expert Answers (5)

Part Description
Clutch Kit, Engine (W/Pressure Plate & Driven Plate)
Manufacturer
General Motors
Manufacturer's Notes
This part is discontinued.

Make sure this part fits

Product Specifications
Vehicle Fitment
Customer Questions & Expert Answers

Product Specifications

Brand	Genuine GM
Manufacturer Part Number	15002591
Part Description	Clutch Kit, Engine (W/Pressure Plate & Driven Plate)
Other Names	Plate Kit, Engine Clutch(Pressure Plate); Clutch Kit
Item Dimensions	15.5 x 15.3 x 3.4 inches
Item Weight	28.00 Pounds
Condition	New
Fitment Type	Direct Replacement
Manufacturer	General Motors
SKU	15002591
Warranty	This genuine GM part is guaranteed by GM's factory warranty.
Shipping & Return	Shipping Policy Return Policy

Warning: California's Proposition 65

Vehicle Fitment

Year Make Model	Trim	Engine
1999-2000 Cadillac Escalade	Base	8 Cyl 5.7 L GAS
1998-1999 Chevrolet C1500	Cheyenne, LS, Silverado, WT	8 Cyl 5.7 L GAS
1998-1999 Chevrolet C1500 Suburban	Base, LS, LT	8 Cyl 5.7 L GAS
1998-2000 Chevrolet C2500	Base, Cheyenne, LS, Silverado, WT	8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS
1998-1999 Chevrolet C2500 Suburban	Base, LS	8 Cyl 5.7 L GAS
1998-2000 Chevrolet C3500	Base, Cheyenne, LS, Silverado	8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS
1998-1999 Chevrolet K1500	Cheyenne, LS, Silverado, WT	8 Cyl 5.7 L GAS
1998-1999 Chevrolet K1500 Suburban	Base, LS, LT	8 Cyl 5.7 L GAS
1998-2000 Chevrolet K2500	Base, Cheyenne, LS, Silverado, WT	8 Cyl 5.7 L GAS
1998-1999 Chevrolet K2500 Suburban	Base, LS	8 Cyl 5.7 L GAS

Customer Questions & Expert Answers
Q:
Is this 15002591 designed for my car? Posted by ChevyPartsGiant Specialist
A:
Please Select Your Vehicle model to see if part number 15002591 is suitable before ordering.
Posted by ChevyPartsGiant Specialist
Q:
How to remove and install a clutch pressure plate and driven plate on Cadillac Escalade? Posted by Customer
A:
Take out the transmission. Take off the quick disconnect that connects the concentric slave cylinder. The system needs a clutch drive gear or a (J5824-01) to effectively support the clutch. Be sure to mark not only the Flywheel (5) but also a clutch Pressure Plate lug so you know where to place them for mounting. Take out the bolts (3) and the washers (2) that attach both the clutch Pressure Plate (4) and the clutch driven plate (1) to the Flywheel (5). Lift out the clutch alignment tool from the clutch collar. Clean each part with a water dampened cloth and make sure there are no signs of damage. With a straight edge, examine the surfaces where the clutch connects and check the friction pads for marks, holes, lots of oil and missing or broken rivets; if there is a lot of oil on the friction pads, replace the clutch driven plate. Look for any damaged splines and check that fit splines slide freely and look over all the springs and the boot for bends, cracks and rips. Insert the bolts and the washers and attach the Pressure Plate and clutch plate to the end of the Flywheel. You should install (J5824-01) or a used clutch drive gear for clutch support. Locate the yellow dot on the clutch Pressure Plate and put it in line with the "x" that appears on the heaviest part of the Flywheel. Tighten the clutch Pressure Plate bolts to 41 nm (30 ft. Lbs.). Take out the alignment tool. Attach the quick disconnect to the end of the concentric slave cylinder. Put the transmission in place.
Posted by ChevyPartsGiant Specialist
Q:
How should the clutch be aligned during installation for the 2000 Chevrolet K3500? Posted by Customer
A:
Use the clutch alignment tool or a used clutch drive gear to support the clutch, aligning the marks made during removal or aligning the lightest part of the clutch pressure plate to the heaviest part of the flywheel.
Posted by ChevyPartsGiant Specialist
See expert answers on similar Pressure Plate
Q:
What needs to be removed to take out the clutch alignment tool for the 2000 GMC C2500? Posted by Customer
A:
Remove the bolts and the washers that secure the clutch pressure plate and the clutch driven plate to the flywheel.
Posted by ChevyPartsGiant Specialist
See expert answers on similar Pressure Plate
Q:
What should be inspected on the splines and springs for the 2000 GMC C3500? Posted by Customer
A:
Inspect all splines for nicks, burrs, and sliding fit, and check all springs for bending and breaks, as well as the boot for tears and brittleness.
Posted by ChevyPartsGiant Specialist
See expert answers on similar Pressure Plate
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 15002591, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 15002591 Pressure Plate. It is sometimes referred to as GM Clutch Disc, GM Pressure Plate. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 15002591 Pressure Plate. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.