GM 15235215
Console Base

The console replacement requires blocking of the wheels followed by rubber ash tray insert removal as well as rubber mat extraction and floor shift control knob detachment. During Center Console replacement for oldsmobile models start by removing the shift lever bezel and storage compartment before you uninstall the retaining screws. Stow the parking brake at its complete engagement while untethering the 2 forward trim extension ears securing the lower ip. Pull the console backward while lifting the rear section to work on electrical connectors which must be detached for this procedure. Use the halfway position of the parking brake to remove the vehicle's Center Console. Position the Center Console inside the vehicle before tightly engaging the parking brake and reconnecting all electrical connections. Lower the rear of the console before you push it forward into place while making sure the 2 retaining ears on the front extensions lock into position with the lower ip. Secure the Center Console retaining screws with 2.5 n.m (22 lb in) torque measurements before adding the console storage compartment, Center Console shift lever bezel, floor shift control knob and rubber ash tray inserts, and rubber mat. Take away all blocks located on the vehicle.