Make sure this part fits

GM 12487661
Air Inlet Duct

2000-2005 GM

Customer Questions & Expert Answers (6)
GM 12487661 Air Inlet Duct
  • Part Description
    Air Intake Hose; Intake Coupling
  • Position
    Front
  • Replaces
    12487582
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number12487661
    Part DescriptionAir Intake Hose; Intake Coupling
    Item Dimensions23.0 x 15.3 x 5.7 inches
    Item Weight2.30 Pounds
    PositionFront
    ConditionNew
    Replaces12487582
    ManufacturerGeneral Motors
    SKU12487661
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2000-2005 Chevrolet CavalierBase, LS, LS Sport, Z244 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
    2000-2005 Pontiac SunfireBase, GT, SE4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 12487661 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12487661 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the windshield washer reservoir on Chevrolet Cavalier? Posted by Customer
    A:
    Before replacing the windshield washer reservoir you need to open the hood and empty the washer solvent from the washer solvent container. Unscrew the washer solvent container cap and take out its left front fender liner. Disconnect both electrical plugs from the washer solvent container and take apart the washer pump hose. Use Door Trim Pad and Garnish Clip Remover tool J 38778 to disconnect air induction tube push-in retainer then take out washer solvent container by uninstalling its screws. Take out the air induction tube screw and disconnect its tube from the container of washer solvent. To install the air induction tube put it into place on top of the washer solvent container then insert and tighten the tube screw at 3 N.m force. Fit the washer solvent container back into position and fasten its screws to 89 lb in torque using a torque wrench. Connect the washer pump hose and electrical connector to push in the air induction tube retainer with washer pump acts first. Reinstall the front fender liner then lower the vehicle to install the washer solvent container cap before filling the container with washer solvent and checking the washer system for correct functionality.
    Posted by ChevyPartsGiant Specialist
    Q:
    What components need to be removed to take out the washer solvent container for the 2005 Chevrolet Cavalier? Posted by Customer
    A:
    Remove the push-in retainer from the air induction tube and the screws securing the washer solvent container.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Washer Reservoir
    Q:
    What is the first step to service the air cleaner fresh air duct/hose for the 2000 Chevrolet Cavalier? Posted by Customer
    A:
    Remove the air cleaner outlet splash shield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Air Hose
    Q:
    What is the final step in the assembly process for the 2001 Chevrolet Cavalier? Posted by Customer
    A:
    Reassemble the headlamp assembly and secure the LH headlamp assembly with retaining screws tightened to 7 N.m (61 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Air Hose
    Q:
    What is the first step to replace the washer solvent container for the 2004 Chevrolet Cavalier? Posted by Customer
    A:
    Open the hood and drain the washer solvent from the container.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Washer Reservoir
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 12487661, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 12487661 Air Inlet Duct. It is sometimes referred to as GM Washer Reservoir, GM Air Intake Coupling, GM Air Hose. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 12487661 Air Inlet Duct. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery