Q: How to replace the air hose inlet duct on Chevrolet Equinox?
A: You should first unclamp both ends of the air cleaner inlet duct, then remove the pcv fresh air pipe and take off the air cleaner inlet duct from the maf sensor and Throttle Body. When putting it in place, first fit the air cleaner intake duct onto the maf sensor and Throttle Body, and afterwards link the pcv fresh air pipe to the air cleaner intake duct. Make sure to fasten the clamps at both ends to 4 nm (35 lb in), while making sure to heed the fastener advisories for vehicle protection.
Q: How to replace the air hose outlet duct on Chevrolet Colorado?
A: In order to replace the air cleaner outlet duct, you should loosen the clamps that hold it in place. Take the duct off both the air cleaner assembly and the air cleaner resonator. For installation connect the air cleaner outlet duct back to the air cleaner assembly and to the air cleaner resonator to make sure the notch of the duct is correctly positioned to the tangs on of the air cleaner assembly and on of the air cleaner resonator. Lastly, tighten the clamps on the air cleaner outlet duct at a 6 n.m (53 lb in), with the fastener notice in service precautions in mind.
Q: How to replace the air hose inlet duct on Chevrolet Malibu?
A: For the replacement of the air cleaner inlet duct, remove the right front tire and also the bead of the right front fender liner. Then remove the air cleaner inlet duct bolt and push pin retainers and air cleaner inlet duct. When adding, place the new air cleaner inlet duct with the air cleaner inlet duct bolt and push pin retainers and tighten down the bolt to 10 N.m (89 lb in). Lastly, check and install the right front fender liner and right front tire and wheel.