Make sure this part fits

GM 18060172
Wheel Cylinder, Rear

1992-2005 GM

Customer Questions & Expert Answers (4)
GM 18060172 Wheel Cylinder, Rear
  • Part Description
    Cylinder Assembly, Rear Brake; Wheel Cylinder Repair Kit
  • Position
    Rear
  • Replaces
    18019217
  • Manufacturer
    General Motors
Make sure this part fits
$39.89 MSRP: $121.16
You Save: $81.27 (68%)
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    1992-1995 Buick LeSabreCustom, Limited6 Cyl 3.8 L GAS
    1992-1995 Buick Park AvenueBase, Ultra6 Cyl 3.8 L GAS
    1993 Cadillac 60 SpecialBase8 Cyl 4.9 L GAS
    1992-1993 Cadillac DeVilleBase, Touring8 Cyl 4.9 L GAS
    1992 Cadillac Fleetwood60 Special, Base, d'Elegance8 Cyl 4.9 L GAS
    1992-1996 Chevrolet Lumina APVBase, CL, LS6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
    1997-2005 Chevrolet VentureBase, LS, LT, Plus, Value, Warner Bros.6 Cyl 3.4 L GAS
    1992-1995 Oldsmobile 88Royale, Royale LS, Royale LSS6 Cyl 3.8 L GAS
    1992-1995 Oldsmobile 98Regency, Regency Elite, Touring6 Cyl 3.8 L GAS
    1992-2004 Oldsmobile SilhouetteBase, GL, GLS, GS, Premiere6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 18060172 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 18060172 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the wheel cylinder on Chevrolet Venture? Posted by Customer
    A:
    Before working on the Wheel Cylinder you must lift the vehicle and put it on stands then you need to remove the tire and wheel. Remove all dirt and debris from both the Wheel Cylinder brake pipe fitting and bleeder valve before moving on to take off the Brake Drum and brake pipe nut. Install a safety cover on the brake pipe at its end to stop brake fluid from spilling followed by taking out the Wheel Cylinder bolts. Open and install the new Wheel Cylinder by spreading brake shoes apart with the j 38400 Brake Shoe spanner and spring remover (J 38400). Deal with all remaining sealant on both parts before reinstalling the Wheel Cylinder if you reuse the plate. The Wheel Cylinder needs to receive loctite gm p/n 12345382 (or an identical product) on its backing plate contact face before reinstalling it using the j 38400 tool to separate the brake shoes. Tighten the Wheel Cylinder bolts to 12 nm (110 inch lbs.) using a tool. Install the brake pipe into the Wheel Cylinder and torque its nut to 17 nm (12 ft. Lbs.) after removing the cap. Set brake shoes to their proper position then install the Brake Drum. Drain and refill the hydraulic brake system afterward we attach the wheel and tire assembly. Lastly place the vehicle back to ground level.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be applied to the wheel cylinder before installation for the 2001 Chevrolet Venture? Posted by Customer
    A:
    Apply LOCTITE GM P/N 12345382 (or equivalent) to the wheel cylinder shoulder face that contacts the backing plate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wheel Cylinder
    Q:
    What components need to be taken out from the wheel cylinder for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Dust boots, pistons, piston seals, spring, and bleeder valve.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wheel Cylinder
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Wheel Cylinder, Rear 18060172 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 18060172 Wheel Cylinder, Rear is available in the market under the name GM Wheel Cylinder. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 18060172 Wheel Cylinder, Rear fits certain Chevrolet Venture, Lumina APV models, as well as Cadillac DeVille, Fleetwood, 60 Special. Additionally, it is compatible with Buick LeSabre, Park Avenue and Pontiac Bonneville, Montana, Trans Sport models.
The original GM component designated by manufacturer part number 18060172 maintains top performance when functioning as the Cylinder Assembly, Rear Brake; Wheel Cylinder Repair Kit unit at its Rear. The component 18060172 is constructed from durable material and its dimensions span 3.6 x 4.4 x 3.8 inches while weighing 1.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Wheel Cylinder Assembly. The part 18060172 has available replacement options 18019217. Each vehicle needs 2 units of the part marked as SKU 18060172. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.