Make sure this part fits

GM 12362508
Fan Blade

1997-2003 GM

Customer Questions & Expert Answers (2)
GM 12362508 Fan Blade
GM 12362508 Fan Blade
  • Part Description
    Fan Kit, Engine Air Cooling; Dual Radiator and Condenser Fan Assembly; Radiator Fan Assembly.
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    1997-1999 Buick CenturyCustom, Limited6 Cyl 3.1 L GAS
    1997-1999 Buick Regal25th Anniversary Edition, GS, LS6 Cyl 3.8 L GAS
    1999-2000 Chevrolet VentureBase, LS, LT, Plus, Value, Warner Bros.6 Cyl 3.4 L GAS
    1998-1999 Oldsmobile IntrigueBase, GL, GLS, GX6 Cyl 3.8 L GAS
    1999-2000 Oldsmobile SilhouetteGL, GLS, GS, Premiere6 Cyl 3.4 L GAS
    1997-2003 Pontiac Grand PrixGT, GTP, SE6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
    1999-2000 Pontiac MontanaBase6 Cyl 3.4 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 12362508 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12362508 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the radiator fan on Chevrolet Venture? Posted by Customer
    A:
    Start by disconnecting the Radiator fan harness electrical connector when the ignition is switched off to replace the electric Radiator fan. Start by partially loosening the bolts on the engine mount strut at the engine end before disconnecting all bracket brace bolts from the upper radiator support. Finally, rotate the brackets to the rear direction. Start by removing the air cleaner together with its duct assembly then disconnect the Radiator fan shroud bolts from the housing. To enhance access remove the transmission oil cooler lines from their mounting brackets after detaching those brackets. Then move the wiring harness near the upper radiator support. You must remove both radiator fans as well as the Radiator fan shroud. The wiring harness should be repositioned before installing the radiator fans with the Radiator fan shroud along with tightening the Radiator fan shroud bolts to 6 nm (53 inch lbs.). Both transmission oil cooler lines should be attached to their retainers before reinstalling the air cleaner assembly alongside its duct. The next step installs engine mount strut bracket brace bolts at the upper radiator support before returning the struts and brackets in place while you tighten the engine mount strut bolts at the engine side. Reconnect the Radiator fan harness electrical connector as the last step.
    Posted by ChevyPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Fan Blade 12362508 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12362508 Fan Blade is available in the market under the name GM A/C Condenser Fan, Fan Blade, Radiator fan. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12362508 Fan Blade fits certain Chevrolet Venture models, as well as Buick Regal, Century. Additionally, it is compatible with Pontiac Grand Prix, Montana and Oldsmobile Intrigue, Silhouette models.
The original GM component designated by manufacturer part number 12362508 maintains top performance when functioning as the Fan Kit, Engine Air Cooling; Dual Radiator and Condenser Fan Assembly; Radiator Fan Assembly. unit. The component 12362508 is constructed from durable material and its dimensions span 17.5 x 17.6 x 2.5 inches while weighing 1.80 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Fan Kit, Engine Air Cooling(Electrical). The part 12362508 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.