Make sure this part fits

GM 20799882
Lower Control Arm, Passenger Side

2004-2013 GM

Customer Questions & Expert Answers (14)
GM 20799882 Lower Control Arm, Passenger Side
GM 20799882 Lower Control Arm, Passenger Side
  • Part Description
    Arm, Steering Knuckle Control Arm and Ball Joint Assembly; Suspension Control Arm Assembly.
  • Position
    Passenger Side
  • Replaces
    10339918, 15878396, 15926340
  • Manufacturer
    General Motors
Make sure this part fits
$261.98 MSRP: $431.57
You Save: $169.59 (40%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2009 Cadillac XLRBase, Platinum, V8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
    2005-2013 Chevrolet Corvette427, Base, Grand Sport, ZR18 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 20799882 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 20799882 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the torque specification for tightening the mounting bolts for the 2008 Cadillac XLR? Posted by Customer
    A:
    Tighten them to 110 N.m (81 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What should be done with the upper ball joint stud nut for the 2007 Chevrolet Corvette? Posted by Customer
    A:
    Loosen the upper ball joint stud nut without removing it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the next step after reinstalling the front transverse spring for the 2005 Cadillac XLR? Posted by Customer
    A:
    Remove the spring compressor tool (J 33432-A).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What should be marked before removing the control arm for the 2009 Cadillac XLR? Posted by Customer
    A:
    Mark the position of the cam bolts for reinstallation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the first step to replace the upper rear axle control arm for the 2004 Cadillac XLR? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the next step after securing the lower ball joint stud for the 2007 Cadillac XLR? Posted by Customer
    A:
    Attach the stabilizer shaft link to the lower control arm and tighten the link nut to 72 N.m (53 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    How should the upper control arm mounting bolts be installed for the 2009 Cadillac XLR? Posted by Customer
    A:
    Install the upper control arm mounting bolts to the frame and tighten them to 110 Nm (81 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What should be done to the lower control arm before loosening the upper ball joint stud nut for the 2007 Cadillac XLR? Posted by Customer
    A:
    Support the lower control arm with a jack stand.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What electrical connectors need to be disconnected for the 2010 Chevrolet Corvette? Posted by Customer
    A:
    The wheel speed sensor electrical connector and the electronic suspension control sensor link.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What should be done to the lower control arm before loosening the upper ball joint stud nut for the 2005 Chevrolet Corvette? Posted by Customer
    A:
    Support the lower control arm with a jack stand.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the first step to replace the rear axle lower control arm for the 2007 Chevrolet Corvette? Posted by Customer
    A:
    Begin by raising and supporting the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    How should the ball joint stud nut be tightened for the 2006 Chevrolet Corvette? Posted by Customer
    A:
    Tighten the ball joint stud nut to 30 Nm (22 ft. lbs.) plus 195 degrees, using an allen wrench if necessary to prevent the ball joint stud from spinning.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What electrical components need to be disconnected for the 2008 Chevrolet Corvette? Posted by Customer
    A:
    Disconnect the wheel speed sensor electrical connector and the electronic suspension control sensor link.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Lower Control Arm, Passenger Side 20799882 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 20799882 Lower Control Arm, Passenger Side is available in the market under the name GM Control Arm. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 20799882 Lower Control Arm, Passenger Side fits certain Chevrolet Corvette models, as well as Cadillac XLR models.
The original GM component designated by manufacturer part number 20799882 maintains top performance when functioning as the Arm, Steering Knuckle Control Arm and Ball Joint Assembly; Suspension Control Arm Assembly. unit at its Passenger Side. The component 20799882 is constructed from durable material and its dimensions span 5.6 x 24.9 x 19.6 inches while weighing 9.90 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 20799882 has available replacement options 10339918, 15878396, 15926340. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.