Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 15058957
Coil Spring, Front

1984-2005 GM

Customer Questions & Expert Answers (4)
GM 15058957 Coil Spring, Front
  • Part Description
    Spring, Front Chassis; Coil Spring Set; Coil Springs
  • Position
    Front
  • Replaces
    15654770
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits

  • 15058957 Coil Spring, Front is Ref No. 15 in the diagram below

    1989 GMC S15 Coil Spring, Front Diagram for 15058957
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 15058957

  • Vehicle Fitment

    Year Make Model Trim Engine
    2001-2005 Chevrolet BlazerBase, LS, LT, Trailblazer, Xtreme, ZR26 Cyl 4.3 L GAS
    2003-2004, 1985-1994 Chevrolet S10Baja, Base, Durango, EL, LS, Sport, SS, Tahoe, Xtreme, ZR2, ZR54 Cyl 1.9 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
    1984-1994 Chevrolet S10 BlazerBase, High Country, LT, Sport, Tahoe, Tahoe LT4 Cyl 1.9 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
    2001, 1992-1994 GMC JimmyBase, Diamond Edition, SL, SLE, SLS, SLT6 Cyl 4.3 L GAS
    1984-1990 GMC S15Base, EL, Gypsy, High Sierra, Sierra Classic4 Cyl 1.9 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
    1984-1991 GMC S15 JimmyBase, Gypsy, High Sierra, Sierra Classic, SLE, SLS, SLT, Timberline4 Cyl 1.9 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
    2003-2004, 1991-1994 GMC SonomaBase, GT, SL, SLE, SLS4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
    1991 GMC SycloneBase6 Cyl 4.3 L GAS
    1992-1993 GMC TyphoonBase6 Cyl 4.3 L GAS
    2001-2004, 1991-1994 Oldsmobile BravadaBase6 Cyl 4.2 L GAS, 6 Cyl 4.3 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 15058957 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15058957 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front coil springs on GMC Sonoma? Posted by Customer
    A:
    In order to replace the front Coil Springs, you need to remove the stabilizer shaft link from the lower Control Arm and the shock absorber. Secure the coil spring remover and installer (J 23028-01) at the end of an appropriate jack, and cradle the lower Control Arm bush with the same. Lift the jack to relieve the tension on the lower arm control pivot drill before you could steer the steering to one end to release steering linkage from the lower Control Arm front pivot drill. Pull off the bottom pivot arm pivot bolt and nuts, the rear of the bottom Control Arm and the front pivot bolt of the bottom Control Arm. Gradually relieve the tension from the front coil spring using the coil spring remover and installer (J 23028-01) and remove the front coil spring and the insulators by not using force on the lower Control Arm or lower ball joint. To install: location the front coil spring with insulators, mounting the coil spring partially covering one inspection drain hole, while partially covering the other hole with the coil spring partly or complete. Use the coil spring remover and installer (J 23028-01) to support the Control Arm, while placing the coil spring and insulator in the upper spring seat on the frame, lift the lower Control Arm with the same tool. Mount the lower Control Arm to the frame while making certain to have enough steering linkage clearance by ensuring the bolts go in the correct direction. Replace the front lower Control Arm pivot bolt and a new nut; replace the rear lower Control Arm pivot bolt and a new nut. Tighten the lower Control Arm pivot bolts nuts with the front suspension loaded- 115 nm (85 ft. Lbs.) for the lower Control Arm front nut and 98 nm (72 ft. Lbs.) at the rear for the lower Control Arm nut. Finally, take out the coil spring remover and installer (J 23028-01), install the shock-absorber, connect the stabilizer shaft link to the lower control bar, and check the field alignment of the front wheel.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the torque specification for tightening the lower control arm pivot bolts for the 2005 Chevrolet Blazer? Posted by Customer
    A:
    Tighten the lower control arm front bolt to 115 Nm (85 ft. lbs.) and the lower control arm rear bolt to 98 Nm (72 ft. lbs.) with the front suspension loaded.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What is the next step after raising the lower control arm for the 2001 GMC Jimmy? Posted by Customer
    A:
    Install the lower control arm to the frame, ensuring adequate steering linkage clearance.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Coil Spring, Front 15058957 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15058957 Coil Spring, Front is available in the market under the name GM Coil Springs. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15058957 Coil Spring, Front fits certain Chevrolet S10, Blazer, S10 Blazer models, as well as GMC Sonoma, Typhoon, Syclone. Additionally, it is compatible with Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 15058957 maintains top performance when functioning as the Spring, Front Chassis; Coil Spring Set; Coil Springs unit at its Front. The component 15058957 is constructed from durable material and its dimensions span 13.9 x 5.7 x 5.8 inches while weighing 9.90 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Spring; Spring, Front(Coil Type). The part 15058957 has available replacement options 15654770. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.