Make sure this part fits

GM 10304598
Upper Hinge, Front Lower

1997-2007 GM

Customer Questions & Expert Answers (16)
GM 10304598 Upper Hinge, Front Lower
GM 10304598 Upper Hinge, Front Lower
  • Part Description
    Hinge, Front Door Lower Hinge; Door Hinge
  • Position
    Front Lower
  • Replaces
    10425262, 12533546
  • Manufacturer
    General Motors
Make sure this part fits
$11.97 MSRP: $17.82
You Save: $5.85 (33%)
Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

  • Vehicle Fitment

    Year Make Model Trim Engine
    1997-2005 Buick CenturyCustom, Limited, Special Edition6 Cyl 3.1 L GAS
    1997-2004 Buick Regal25th Anniversary Edition, GS, GSE, LS, LSE6 Cyl 3.8 L GAS
    2000-2007 Chevrolet Monte CarloLS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
    1998-2002 Oldsmobile IntrigueBase, GL, GLS, GX6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS
    1997-2003 Pontiac Grand PrixGT, GTP, SE6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 10304598 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10304598 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the procedure for the body side hinge installation for the 2005 Buick Century? Posted by Customer
    A:
    Align the new body side hinge with the old marks, apply Locktite(R) Blue, and install the 13 mm body side hinge bolts, lightly tightening them.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be avoided to prevent issues during the process for the 2001 Buick Century? Posted by Customer
    A:
    Be careful not to loosen the cone adjuster bolt to avoid it falling inside the pillar, which could cause rattling.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the final step in the process for the 2002 Buick Century? Posted by Customer
    A:
    Remove the door support, adjust the door, and close it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the first step to replace the rear door hinge for the 2003 Buick Century? Posted by Customer
    A:
    First, open and support the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What needs to be removed to access the body side hinge bolts for the 2001 Buick Regal? Posted by Customer
    A:
    Remove the front fender insulator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What needs to be removed to access the body side hinge bolts for the 2000 Buick Regal? Posted by Customer
    A:
    Remove the front fender insulator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How many attaching bolts does the body side door hinge have for the 2002 Buick Regal? Posted by Customer
    A:
    The body side door hinge has four attaching bolts: two 13 mm bolts, one TORX(R) bolt, and one 10 mm bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the next step after marking the hinge location for the 2005 Buick Century? Posted by Customer
    A:
    Remove the bolts from the door side hinge and take off the door side hinge.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done to the hinge mounting surfaces for the 2000 Buick Regal? Posted by Customer
    A:
    Clean the hinge mounting surfaces on the door and mark the hinge location with a grease pencil.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be removed after supporting the door for the 2004 Buick Regal? Posted by Customer
    A:
    Remove the intermediate door hinge bolts and the hinge spring.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How should the mounting surfaces of the hinges be prepared for the 2002 Chevrolet Monte Carlo? Posted by Customer
    A:
    Clean the mounting surfaces of the hinges with a clean rag and mark the front door hinge locations on each surface with a grease pencil or suitable marker.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done after installing the doorside hinge bolts for the 2003 Chevrolet Monte Carlo? Posted by Customer
    A:
    Install the doorside hinge bolts, also tightening them to 33 N.m (24 lb ft), remove the door support, and inspect the door for proper operation and alignment.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How should the bodyside hinge be installed for the 2001 Chevrolet Monte Carlo? Posted by Customer
    A:
    Position the bodyside hinge according to the alignment marks and install the bolts, tightening them to 33 N.m (24 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done after opening the front door for the 2000 Chevrolet Monte Carlo? Posted by Customer
    A:
    Remove the intermediate hinge bolts from the front door hinge, then move the door as far as the rubber conduit allows.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done after opening the door for the 2006 Chevrolet Monte Carlo? Posted by Customer
    A:
    Remove the intermediate hinge bolts from the front door hinge, then move the door as far as the rubber conduit allows.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Upper Hinge, Front Lower 10304598 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 10304598 Upper Hinge, Front Lower is available in the market under the name GM Door Hinge. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 10304598 Upper Hinge, Front Lower fits certain Chevrolet Monte Carlo models, as well as Buick Regal, Century. Additionally, it is compatible with Pontiac Grand Prix and Oldsmobile Intrigue models.
The original GM component designated by manufacturer part number 10304598 maintains top performance when functioning as the Hinge, Front Door Lower Hinge; Door Hinge unit at its Front Lower. The component 10304598 is constructed from durable material and its dimensions span 9.3 x 8.2 x 6.4 inches while weighing 3.20 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Lower Hinge; Hinge, Front Door Upper Hinge. The part 10304598 has available replacement options 10425262, 12533546. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.