Make sure this part fits

GM 10304613
Lower Hinge, Rear Driver Side

1997-2005 GM

Customer Questions & Expert Answers (11)
GM 10304613 Lower Hinge, Rear Driver Side
  • Part Description
    Hinge, Rear Side Door Lower Hinge; Door Hinge
  • Position
    Rear Lower Driver Side
  • Replaces
    10425265, 12534756
  • Manufacturer
    General Motors
Make sure this part fits
$39.30 MSRP: $56.23
You Save: $16.93 (31%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number10304613
    Part DescriptionHinge, Rear Side Door Lower Hinge; Door Hinge
    Item Dimensions3.8 x 3.5 x 3.5 inches
    Item Weight2.00 Pounds
    PositionRear Lower Driver Side
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces10425265, 12534756
    ManufacturerGeneral Motors
    SKU10304613
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    1997-2005 Buick CenturyCustom, Limited, Special Edition6 Cyl 3.1 L GAS
    1997-2004 Buick Regal25th Anniversary Edition, GS, GSE, LS, LSE6 Cyl 3.8 L GAS
    1998-2002 Oldsmobile IntrigueBase, GL, GLS, GX6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 10304613 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10304613 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the procedure for removing the body side hinge for the 2000 Buick Regal? Posted by Customer
    A:
    Remove the two 13 mm body side hinge bolts and the TORX(R) head body side hinge bolt, then take off the body side hinge.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done after installing the body side hinge for the 2004 Buick Regal? Posted by Customer
    A:
    Reinstall the intermediate door hinge bolts, tightening them to 33 N.m (24 lb ft), and then reinstall the front fender insulator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the first step to replace the rear door hinge for the 2002 Buick Century? Posted by Customer
    A:
    First, open and support the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How should the new hinge be installed for the 2003 Buick Century? Posted by Customer
    A:
    Align the new hinge with the old alignment marks, applying Locktite(R) Blue before installing the door side hinge bolts, which should be lightly tightened.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the next step after marking the hinge location for the 2000 Buick Regal? Posted by Customer
    A:
    Remove the door side hinge bolts and the hinge itself, then clean the hinge mounting surface on the body pillar and mark its location as well.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How should the door be positioned after removing the hinge bolts for the 2001 Buick Regal? Posted by Customer
    A:
    Move the door away from the front pillar as far as the conduit allows.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What are the final steps after reinstalling the components for the 2005 Buick Century? Posted by Customer
    A:
    Remove the door support, adjust the door, and finally close it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What are the final steps after installing the hinges for the 2002 Buick Regal? Posted by Customer
    A:
    Reinstall the front fender insulator, remove the door support, adjust the door, and finally close it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How should the hinge mounting surfaces be prepared for the 2001 Buick Century? Posted by Customer
    A:
    Clean the hinge mounting surfaces on the door with a rag and mark the hinge location using a grease pencil.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done after installing the body side hinge for the 2005 Buick Century? Posted by Customer
    A:
    Position the door to install the intermediate bolts, then install the hinge spring and the intermediate door hinge bolts, tightening them to 33 Nm (24 lb ft), along with the body side and door side hinge bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 10304613, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 10304613 Lower Hinge, Rear Driver Side. It is sometimes referred to as GM Door Hinge. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 10304613 Lower Hinge, Rear Driver Side. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Buick parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery