Make sure this part fits

GM 19366755
Flex Hose, Rear

1991-2003 GM

Customer Questions & Expert Answers (7)
GM 19366755 Flex Hose, Rear
GM 19366755 Flex Hose, Rear
  • Part Description
    Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line
  • Position
    Rear
  • Replaces
    22113466, 17989773
  • Manufacturer
    General Motors
Make sure this part fits
$35.53 MSRP: $66.72
You Save: $31.19 (47%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number19366755
    Part DescriptionHose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line
    Other NamesHose, Hydraulic Brake
    Item Dimensions6.1 x 18.9 x 1.1 inches
    Item Weight0.60 Pounds
    PositionRear
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces22113466, 17989773
    ManufacturerGeneral Motors
    SKU19366755
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    1995-2001 Chevrolet BlazerBase, LS, LT, Trailblazer, Xtreme6 Cyl 4.3 L GAS
    1991-2003 Chevrolet S10Baja, Base, EL, LS, SS, Tahoe, Xtreme, ZR2, ZR54 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
    1991-1994 Chevrolet S10 BlazerBase, LT, Sport, Tahoe, Tahoe LT6 Cyl 4.3 L GAS
    1992-2001 GMC JimmyBase, Diamond Edition, Envoy, SL, SLE, SLS, SLT6 Cyl 4.3 L GAS
    1991 GMC S15 JimmyBase, SLE, SLS, SLT6 Cyl 4.3 L GAS
    1991-2003 GMC SonomaBase, GT, SL, SLE, SLS4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
    1991 GMC SycloneBase6 Cyl 4.3 L GAS
    1992-1993 GMC TyphoonBase6 Cyl 4.3 L GAS
    1996-2001, 1991-1994 Oldsmobile BravadaBase6 Cyl 4.3 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 19366755 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19366755 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What are the steps and precautions for replacing brake lines on GMC Sonoma? Posted by Customer
    A:
    Replacing the brake pipes, always make sure to use double walled steel brake pipe to prevent brake system failure and ensure correct routing and retention of the replacement pipes by using the correct fasteners in their original positions to avoid he damage leading to personal injury. Keep a parallel clearance of 6mm (1/4 lbs.) on the brake pipes. Start by disconnecting brake pipe fittings, and brake pipe fasteners from vehicle, and after that remove brake pipe. Bend the new brake pipe to the proper fit and install it, maintaining a clearance of 19 mm (3/4 lbs.) from the moving or the vibrating parts. This include securing the brake pipe fasteners on the vehicle and the brake pipe fittings and tightening them to 20 Nm (15 ft. lbs.) for the BPMV BPMV, or wheel jounce hoses or to higher of 30 Nm (22 ft. lbs.) on the master cylinder. Finally, bleed the brake hydraulic system depending on the updated brake pipe in accordance to proper procedure.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you disconnect the brake pipe from the brake hose for the 2002 Chevrolet S10? Posted by Customer
    A:
    Use a backup wrench on the brake pipe fitting to disconnect it, and install a plug or cap on the exposed brake pipe fitting end to prevent fluid loss and contamination.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the first step to replace the front brake hose on a dual piston caliper for the 2002 Chevrolet S10? Posted by Customer
    A:
    First, raise the vehicle and remove the front tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be removed after disconnecting the brake pipe fitting for the 2001 GMC Jimmy? Posted by Customer
    A:
    The brake pipe retainer and the front flex hose support bracket nut and bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the torque specification for tightening the front flex hose bolt for the 2000 GMC Jimmy? Posted by Customer
    A:
    54 Nm (40 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be ensured during the installation of the front flex hose for the 2000 GMC Jimmy? Posted by Customer
    A:
    The front flex hose should not be twisted and should not contact other components.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 19366755, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 19366755 Flex Hose, Rear. It is sometimes referred to as GM Brake Line, GM Hydraulic Hose. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 19366755 Flex Hose, Rear. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery