Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 15139614
A/C Hoses

2000-2005 GM

Customer Questions & Expert Answers (7)
GM 15139614 A/C Hoses
GM 15139614 A/C Hoses
GM 15139614 A/C Hoses
  • Part Description
    Hose, Air Conditioner Refrigerant (Metal And Rubber Sections); A/C Refrigerant Liquid Hose; A/C Hose
  • Replaces
    25736713, 25706755, 25661973
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • 2004 Buick LeSabre A/C Hoses Diagram for 15139614
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 15139614

  • Vehicle Fitment

    Year Make Model Trim Engine
    2000-2005 Buick LeSabreCustom, Limited6 Cyl 3.8 L GAS
    2000-2005 Pontiac BonnevilleSE, SLE, SSEi6 Cyl 3.8 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 15139614 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15139614 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to Replace an A/C Hose in the Evaporator Hose Assembly on Buick LeSabre? Posted by Customer
    A:
    To replace the a/c evaporator hose assembly, first the best alternative and also some identified components namely a/c refrigerant recovery, recycling and recharging system (ACR4) system (J 39500-B) to recover refrigerant from the a/c system then remove negative Battery Cable. Displace the a/c evaporator hose from the accumulator, then, the right headlamp to reach the evaporator overflow hose where it is attached to the condenser, and finally displace it from the condenser. Then, disconnect the evaporator hose from the accumulator cover and evaporator line fastener from the evaporator, as well as the a/c evaporator hose. Pry up to pull the a/c line clip out of the rail and move the accumulator and condenser ends of the hose assembly under the coolant overflow hose and finally pull the a/c evaporator hose off of the vehicle. Instalation: posisi the a/c evap hose in vehicle and install the a/c evap hose clip into rail and check the seal washers for damage and replace any suspect seals. Install the a/c evaporator hose to the evaporator, and connect the evaporator line fastener and the connection between the A/C Hose and the evaporator by tightening it to 20 n.m (15 lb ft). Next, attach the evaporator hose to the accumulator securing it to a 20 n.m (15 lb ft) and then attach the a/c evaporator hose to the condenser and secure that connection to a 20 n.m (15 lb ft) as well. Install the right headlamp, guide the evaporator hose back into the accumulator cover, and reconnect the negative cable of the battery. Recharge the a/c system and inspect for leaks by using the electronic halogen leak detector (J 39400-A).
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the A/C compressor hose assembly for the 2000 Buick LeSabre? Posted by Customer
    A:
    Use the A/C Refrigerant Recovery, Recycling and Recharging (ACR4) System (J 39500-B) to recover the refrigerant from the A/C system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    What is the torque specification for the A/C compressor hose nut at the accumulator for the 2004 Buick LeSabre? Posted by Customer
    A:
    Tighten the nut to 20 N.m (15 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    What is the tightening specification for the evaporator hose nut to the accumulator for the 2001 Buick LeSabre? Posted by Customer
    A:
    Tighten the evaporator hose nut to 20 N.m (15 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    What should be done after connecting the evaporator hose to the accumulator for the 2005 Buick LeSabre? Posted by Customer
    A:
    Tighten the hose nut to 20 N.m (15 lb ft) and connect the hose to the condenser, tightening that nut as well.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    What is the first step in the installation process for the 2002 Buick LeSabre? Posted by Customer
    A:
    Position the A/C evaporator hose in the vehicle and install the A/C evaporator hose clip into the rail.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM A/C Hoses 15139614 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15139614 A/C Hoses is available in the market under the name GM A/C Hose. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15139614 A/C Hoses fits certain Buick LeSabre models, as well as Pontiac Bonneville models.
The original GM component designated by manufacturer part number 15139614 maintains top performance when functioning as the Hose, Air Conditioner Refrigerant (Metal And Rubber Sections); A/C Refrigerant Liquid Hose; A/C Hose unit. The component 15139614 is constructed from durable material and its dimensions span 25.2 x 24.7 x 6.1 inches while weighing 4.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Liquid Line; Return Line Assembly; Hose, A/C Refrigerant (Metal And Rubber Sections). The part 15139614 has available replacement options 25736713, 25706755, 25661973. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.