Make sure this part fits

GM 19256891
Flex Hose, Front

2003-2007 GM

Customer Questions & Expert Answers (14)
GM 19256891 Flex Hose, Front
  • Part Description
    Hose Kit, Front Brake; Hydraulic Hose; Brake Hose; Brake Line
  • Position
    Front
  • Replaces
    15933097, 15875854
  • Manufacturer
    General Motors
Make sure this part fits
$22.77 MSRP: $42.76
You Save: $19.99 (47%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2007 Cadillac CTSBase, Luxury, Luxury Sport, V6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
    2007 Cadillac STSBase, V6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19256891 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19256891 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What are the final steps after installation for the 2007 Cadillac STS? Posted by Customer
    A:
    Bleed the hydraulic brake system, reinstall the left tire and wheel assembly, and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What are the final steps after installing the brake hose for the 2007 Cadillac CTS? Posted by Customer
    A:
    Bleed the hydraulic brake system, reinstall the left tire and wheel assembly, and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done with the intermediate brake hose assembly mounting nuts for the 2005 Cadillac CTS? Posted by Customer
    A:
    Remove them from the studs and take out the assembly from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done after connecting the clutch hydraulic hose to the master cylinder for the 2007 Cadillac CTS? Posted by Customer
    A:
    Tug gently to ensure proper retention, then bleed the clutch hydraulic system and position the coolant surge tank in the proper location before installing the surge tank bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Hydraulic Hose
    Q:
    What should be done after installing the tube nuts on the brake pipe for the 2004 Cadillac CTS? Posted by Customer
    A:
    Clean the pipe and the J 45405 of any contaminants and prepare the dies by selecting the corresponding die set and installing them into the die cage.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done after capping the exposed fittings for the 2004 Cadillac CTS? Posted by Customer
    A:
    Disconnect the clutch hydraulic hose from the clutch master cylinder.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Hydraulic Hose
    Q:
    What should be done after flaring the pipe for the 2007 Cadillac CTS? Posted by Customer
    A:
    Shape the new pipe as necessary with a brake pipe bending tool, install it with the appropriate unions, secure it to the retainers, bleed the hydraulic brake system, and check for leaks by starting the engine and applying the brakes with assistance.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the next step after installing the clutch hydraulic hose to the clutch slave cylinder for the 2006 Cadillac CTS? Posted by Customer
    A:
    Lower the vehicle, install the clutch hydraulic hose retaining clip to the clutch master cylinder, and connect the clutch hydraulic hose to the clutch master cylinder, pushing it in until a "click" is heard and tugging gently to ensure proper retention.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Hydraulic Hose
    Q:
    What is the next step after removing the intermediate brake hose assembly mounting nuts for the 2006 Cadillac CTS? Posted by Customer
    A:
    Take out the intermediate brake hose assembly from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How should the brake pipe fittings be installed for the 2003 Cadillac CTS? Posted by Customer
    A:
    Install them to the brake hose and tighten them to 15 N.m (11 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How do you install the clutch hydraulic hose for the 2005 Cadillac CTS? Posted by Customer
    A:
    Align the hose locating tab with the notch in the slave cylinder hose fitting, push the hose into the clutch slave cylinder until a "click" is heard, then tug gently to ensure proper retention.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Hydraulic Hose
    Q:
    What are the final steps after lowering for the 2003 Cadillac CTS? Posted by Customer
    A:
    Install the clutch hydraulic hose retaining clip to the clutch master cylinder, connect the clutch hydraulic hose to the clutch master cylinder, and push it in until a "click" is heard, followed by a gentle tug to ensure proper retention. Finally, bleed the clutch hydraulic system and position the coolant surge tank correctly before installing the surge tank bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Hydraulic Hose
    Q:
    What is the torque specification for connecting the brake pipe fitting to the brake hose for the 2007 Cadillac STS? Posted by Customer
    A:
    18 N.m (13 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Flex Hose, Front 19256891 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19256891 Flex Hose, Front is available in the market under the name GM Brake Line, Hydraulic Hose. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19256891 Flex Hose, Front fits certain Cadillac CTS, STS models.
The original GM component designated by manufacturer part number 19256891 maintains top performance when functioning as the Hose Kit, Front Brake; Hydraulic Hose; Brake Hose; Brake Line unit at its Front. The component 19256891 is constructed from durable material and its dimensions span 8.2 x 7.7 x 3.3 inches while weighing 1.00 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Hose Kit, Hydraulic Brake. The part 19256891 has available replacement options 15933097, 15875854. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.