Make sure this part fits

GM 26039289
Inner CV Joint, Front

1995-2005 GM

Customer Questions & Expert Answers (13)
GM 26039289 Inner CV Joint, Front
  • Part Description
    Joint Kit, Front Wheel Drive Axle; CV Joint
  • Position
    Front
  • Manufacturer
    General Motors
Make sure this part fits
$164.17 MSRP: $306.34
You Save: $142.17 (47%)
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    1995-2005 Chevrolet CavalierBase, LS, LS Sport, Z244 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS
    2004-2005 Chevrolet ClassicBase, LS4 Cyl 2.2 L GAS
    1997-2003 Chevrolet MalibuBase, LS4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS
    1999-2004 Oldsmobile AleroGL, GLS, GX4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.4 L GAS
    1997-1999 Oldsmobile CutlassBase, GL, GLS6 Cyl 3.1 L GAS
    1997 Oldsmobile Cutlass SupremeBase6 Cyl 3.1 L GAS
    1999-2005 Pontiac Grand AmGT, GT1, SE, SE1, SE24 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.4 L GAS
    1995-2005 Pontiac SunfireBase, GT, SE4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 26039289 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 26039289 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done before removing the CV joint assembly for the 2001 Chevrolet Cavalier? Posted by Customer
    A:
    Measure the distance between a reference mark on the halfshaft bar and the face of the CV joint inner race, noting this measurement.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    How do you crimp the small retaining clamp for the 2005 Chevrolet Cavalier? Posted by Customer
    A:
    Use the Drive Axle Seal Clamp Pliers, breaker bar, and torque wrench to crimp it to 136 Nm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    What should be done after cleaning all components for the 2001 Chevrolet Cavalier? Posted by Customer
    A:
    Inspect for damage and replace any defective parts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    What tools are required for servicing and repairing the Constant Velocity Joint Boot for the 2005 Chevrolet Classic? Posted by Customer
    A:
    Drive Axle Seal Clamp Pliers (J35910) and Snap Ring Pliers (J8059).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    What should be done after removing the large seal retaining clamp for the 2004 Chevrolet Classic? Posted by Customer
    A:
    Remove the small seal retaining clamp from the halfshaft bar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    What is the first step in the assembly process for the 2004 Chevrolet Cavalier? Posted by Customer
    A:
    Install a new small seal retaining clamp on the neck of the seal without crimping it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    What is the first step in the process for the 2003 Chevrolet Cavalier? Posted by Customer
    A:
    Begin by removing the large seal retaining clamp from the CV joint with a side cutter and discarding it, followed by the small seal retaining clamp from the halfshaft bar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    What is the procedure for positioning the housing over the tripot joint spider assembly for the 2004 Chevrolet Classic? Posted by Customer
    A:
    Position the larger new clamp on the inboard seal, slide the housing over the tripot joint spider assembly on the halfshaft bar, and slide the large diameter of the inboard seal over the outside of the tri-lobal tripot bushing, locating the lip of the seal in the groove.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    How should the CV joint be packed for the 2003 Chevrolet Malibu? Posted by Customer
    A:
    Pack the CV joint with grease and push it onto the bar until the retaining ring is seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    How do you handle the spacer ring and spider assembly for the 2003 Chevrolet Malibu? Posted by Customer
    A:
    Use the Snap Ring Pliers (J8059) to spread the spacer ring and slide the spacer ring and spider assembly back on the bar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    How do you separate the seal from the CV joint for the 2002 Chevrolet Malibu? Posted by Customer
    A:
    Separate the seal from the CV joint outer race and slide it away from the joint along the bar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    What tools are needed to replace the wheel drive shaft inner joint and seal for the 2002 Chevrolet Malibu? Posted by Customer
    A:
    Drive Axle Seal Clamp Pliers (J 35566), Drive Axle Seal Clamp Pliers (J 35910), Stub Shaft Removal (J 38868), Impact Slide Hammer (J 6125), and Snap Ring Pliers (J 8059).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Inner CV Joint, Front 26039289 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 26039289 Inner CV Joint, Front is available in the market under the name GM CV Joint. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 26039289 Inner CV Joint, Front fits certain Chevrolet Malibu, Classic, Cavalier models, as well as Pontiac Grand Am, Sunfire. Additionally, it is compatible with Oldsmobile Cutlass, Alero, Cutlass Supreme models.
The original GM component designated by manufacturer part number 26039289 maintains top performance when functioning as the Joint Kit, Front Wheel Drive Axle; CV Joint unit at its Front. The component 26039289 is constructed from durable material and its dimensions span 7.8 x 7.2 x 6.6 inches while weighing 6.50 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Inner Joint; Inner Joint Assembly. The part 26039289 has available replacement options. Each vehicle needs 2 units of the part marked as SKU 26039289. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.