Make sure this part fits

GM 15851956
Stabilizer Link

2005-2008 GM

Customer Questions & Expert Answers (8)
GM 15851956 Stabilizer Link
GM 15851956 Stabilizer Link
  • Part Description
    Link, Stabilizer Shaft; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link
  • Position
    Front
  • Replaces
    15226438, 15176604
  • Manufacturer
    General Motors
Make sure this part fits
$36.92 MSRP: $69.34
You Save: $32.42 (47%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2007 Buick TerrazaCX, CXL6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2005-2008 Chevrolet UplanderBase, LS, LT6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2005-2006 Pontiac MontanaSV66 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    2005-2007 Saturn Relay1, 2, 36 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15851956 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15851956 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the rear IRS sway bar link on Buick Terraza? Posted by Customer
    A:
    The first step to replace the sway bar link into rear IRS consists of performing proper vehicle elevation along with support. Start by taking off the wheel along with its tire but keep the sway bar link bolt and nut anchored. Then extract the sway bar link out of the vehicle body. You should put the sway bar link into position according to the Fastener Notice during setup. The sway bar link demands installation of its bolt and nut after which you must tighten the nut to 19 N.m (14 lb ft). Finish the process by putting back the wheel assembly followed by allowing the vehicle to drop.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the rear sway bar link with a twist axle on Chevrolet Uplander? Posted by Customer
    A:
    First, to replace the Sway Bar Link with a rear twist axle, first you need to raise and support the vehicle. Take off the Sway Bar Link upper nut and lower nut as well as remove the Sway Bar Link from the suspension strut and sway bar. Next, install the new Sway Bar Link on the suspension strut and sway bar, providing to follow the fastener notice for correct installation. Secure the Sway Bar Link nuts to 45 n.m (33 lbft). Lastly, put back the tire and wheel assembly and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    Q:
    What tool is needed to hold the stabilizer shaft link while removing it for the 2005 Buick Terraza? Posted by Customer
    A:
    Use a wrench to hold the stabilizer shaft link.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What is the first step to replace the stabilizer shaft link in the rear suspension for the 2006 Buick Terraza? Posted by Customer
    A:
    First, raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What is the torque specification for securing the stabilizer shaft link nuts for the 2007 Buick Terraza? Posted by Customer
    A:
    Tighten them to 45 N.m (33 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What should be removed after raising for the 2006 Chevrolet Uplander? Posted by Customer
    A:
    The tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    How do you install the new stabilizer shaft link for the 2005 Chevrolet Uplander? Posted by Customer
    A:
    Position the stabilizer link into the vehicle, adhering to the Fastener Notice in Service Precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Stabilizer Link 15851956 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15851956 Stabilizer Link is available in the market under the name GM Sway Bar Link. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15851956 Stabilizer Link fits certain Chevrolet Uplander models, as well as Buick Terraza. Additionally, it is compatible with Pontiac Montana and Saturn Relay models.
The original GM component designated by manufacturer part number 15851956 maintains top performance when functioning as the Link, Stabilizer Shaft; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link unit at its Front. The component 15851956 is constructed from durable material and its dimensions span 4.8 x 16.0 x 0.7 inches while weighing 1.20 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Link. The part 15851956 has available replacement options 15226438, 15176604. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.