Make sure this part fits

GM 17113201
Intake Manifold, Lower

1996-2002 GM

Customer Questions & Expert Answers (16)
GM 17113201 Intake Manifold, Lower
  • Part Description
    Manifold Kit, Lower Intake
  • Position
    Lower
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number17113201
    Part DescriptionManifold Kit, Lower Intake
    Other NamesManifold; Manifold Kit, Engine Fuel Intake Manifold
    Item Dimensions34.3 x 21.4 x 12.6 inches
    Item Weight29.80 Pounds
    PositionLower
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU17113201
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    1999-2000 Cadillac EscaladeBase8 Cyl 5.7 L GAS
    1996-1999 Chevrolet C1500Base, Cheyenne, LS, Silverado, WT8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
    1996-1999 Chevrolet C1500 SuburbanBase, LS, LT8 Cyl 5.7 L GAS
    1996-2000 Chevrolet C2500Base, Cheyenne, LS, Silverado, WT8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS
    1996-1999 Chevrolet C2500 SuburbanBase, LS, LT8 Cyl 5.7 L GAS
    1996-2000 Chevrolet C3500Base, Cheyenne, LS, Silverado8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS
    1996-2002 Chevrolet Express 2500Base, LS8 Cyl 5.0 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS
    1996-2002 Chevrolet Express 3500Base, LS8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS
    1996-1999 Chevrolet K1500Base, Cheyenne, LS, Silverado, WT8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
    1996-1999 Chevrolet K1500 SuburbanBase, LS, LT8 Cyl 5.7 L GAS
    View More
  • Customer Questions & Expert Answers

    Q:
    Is this 17113201 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 17113201 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How should the cruise control cable be installed for the 2002 Chevrolet Express 2500? Posted by Customer
    A:
    Install the cruise control cable if equipped to the throttle shaft and accelerator control cable bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What components should be removed related to the AIR system for the 2000 Chevrolet Express 3500? Posted by Customer
    A:
    If equipped, remove the AIR bypass hose assembly and the EVAP canister purge solenoid valve.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What are the final steps to complete the process for the 2001 Chevrolet Express 3500? Posted by Customer
    A:
    Reinstall the air cleaner intake duct, engine cover, and reconnect the battery negative cable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What is the proper tightening sequence and torque specifications for the 2001 Chevrolet Express 3500? Posted by Customer
    A:
    Follow the proper tightening sequence and torque specifications: first pass in sequence (1-8) to 3 Nm (27 inch lbs.), second pass to 12 Nm (106 inch lbs.), and final pass to 15 Nm (11 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    How should the lower intake manifold gaskets be placed during installation for the 2000 Chevrolet K3500? Posted by Customer
    A:
    Place the lower intake manifold gaskets onto the cylinder head with THIS SIDE UP facing up.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    Which components should be taken out next for the 2000 Chevrolet K3500? Posted by Customer
    A:
    The ignition coil, throttle body, EVAP canister solenoid valve, and the number 8 spark plug wire from the distributor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What should be removed if required after detaching the coolant air bleed clamp for the 2000 GMC C2500? Posted by Customer
    A:
    Remove the accelerator control cable bracket and bolts if required.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What is the torque specification for the intake manifold bolts on the final pass for the 2000 GMC C2500? Posted by Customer
    A:
    Tighten them to 10 Nm (89 inch lbs.) on the final pass.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    How should the intake manifold be cleaned for the 2000 GMC C2500? Posted by Customer
    A:
    Clean the intake manifold in solvent, ensuring to clean the gasket surfaces and internal passages while wearing safety glasses.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What should be done after removing the valve rocker arm covers for the 2000 GMC C3500? Posted by Customer
    A:
    Remove the intake manifold and clean all surfaces afterward.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What components need to be removed before accessing the upper intake manifold for the 2000 GMC Savana 3500? Posted by Customer
    A:
    Remove the engine cover and the air cleaner intake duct.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    How do you disconnect the Intake Air Temperature (IAT) sensor for the 2001 GMC Savana 2500? Posted by Customer
    A:
    Disconnect the harness connector of the IAT sensor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What is the final step in removing the lower intake manifold for the 2002 GMC Savana 3500? Posted by Customer
    A:
    Remove the lower intake manifold and clean all sealing surfaces.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What should be done before installing the new lower intake manifold for the 2000 GMC Savana 3500? Posted by Customer
    A:
    Clean all sealing surfaces.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What should be done with the vacuum brake booster hose for the 2001 GMC Savana 3500? Posted by Customer
    A:
    Install it if equipped.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 17113201, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 17113201 Intake Manifold, Lower. It is sometimes referred to as GM Intake Manifold. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 17113201 Intake Manifold, Lower. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery