GM 84360848
Blower Motor

The first step to replace the auxiliary blower motor involves two processes: detaching the auxiliary HVAC module and disconnecting electrical connectors from the auxiliary blower motor. The procedure starts with screw removal from the bolts that fasten the auxiliary blower motor followed by motor extraction. The first step requires you to detach the retaining clip from the fan cage followed by removing the fan cage from the auxiliary blower motor. You should connect the fan cage to the auxiliary blower motor by using the retaining clip. Affix the auxiliary blower motor while screwing its components to a torque setting of 5 N.m (44 lb in). Connect the electric wires to the auxiliary blower motor before putting back the auxiliary HVAC module.

Start your replacement work by taking the Coolant Reservoir out then disconnect the Blower Motor connector and disconnect the cooling tube. First remove the two screws holding the Blower Motor while keeping the electrical connector plugged in. After that, you can take the motor out of its place. Sever the fan cage retaining clip connection and lift off the fan cage assembly from the Blower Motor. Fasten the fan cage on top of the Blower Motor part then lock it using the retaining clip. Replace the Blower Motor while tightening its retaining screws to 2 n.m with a torque wrench according to service precautions. Insert the cooling tube into the Blower Motor and connect both the electrical connector and reservoir back into place.

Begin replacing the auxiliary blower motor by removing the auxiliary HVAC module then disconnecting the electrical connectors from the motor unit. Disassemble the auxiliary blower motor by taking out the screws holding it. Separate the retaining clip from its position on the fan cage before removing the fan cage from the auxiliary blower motor. Attach fan cage to the auxiliary blower motor and fasten it with the retaining clip for installation. After positioning the auxiliary blower motor in place you should screw it in place with the screws and tighten them to 5 N.m (44 lb in). Afterward plug the electrical connections back into the auxiliary blower motor and place the auxiliary HVAC module back into position.

The first step to replace the auxiliary blower motor should start with auxiliary HVAC module removal. The auxiliary blower motor needs disconnection from its electrical connectors before screws can be removed which secure the component. Under removal procedures, detach the auxiliary blower motor before removing first the retaining clip from the fan cage and finally the fan cage. You must connect the fan cage to the auxiliary blower motor before applying the retaining clip to fasten the components. Fasten the auxiliary blower motor by screwing the fasteners with torque at 5 Nm (44 lb in). The electrical connectors need to be reattached to the auxiliary blower motor while the installation of the auxiliary HVAC module completes the process.

The initial step to replace an auxiliary blower motor requires removing the auxiliary HVAC module together with disconnecting electrical connectors from this component. First concentrate on unscrewing the screws that maintain the auxiliary blower motor position before you remove the motor appliance. Start by detaching the retaining clip from the fan cage followed by fan cage removal from the auxiliary blower motor. Assistant motor installation requires users to bind the fan cage to the auxiliary blower motor after which the retaining clip must be tightened for stability. Attach the auxiliary blower motor to its position by using screws which should be tightened to 5 N.m (44 lb in). The final stage of installation includes reconnecting the electrical connectors to the auxiliary blower motor together with reinstallation of the auxiliary HVAC module.

The first step to replace the auxiliary blower motor is removal of the auxiliary HVAC module. Begin by disconnecting power cables from the auxiliary blower motor and then remove its screws for securement. First detach the auxiliary blower motor from its installation before taking out the retaining clip from the fan cage and then removing the fan cage itself. The fan cage installation requires connection to the auxiliary blower motor followed by retaining clip attachment. Fastener caution guidelines should be followed during the installation of the auxiliary blower motor. Secure the screws on the auxiliary blower motor at 5 Nm using metric units while connecting the electrical connectors. Conclusion of the procedure involves reinstallation of the auxiliary HVAC module.

Take out the retainers and remove the auxiliary blower motor from the heater case.