Make sure this part fits

GM 88983256
Filler Neck

2002-2004 GM

Customer Questions & Expert Answers (4)
GM 88983256 Filler Neck
GM 88983256 Filler Neck
  • Part Description
    Pipe, Fuel Tank Filler; Fuel Tank Filler Neck; Fuel Filler Hose
  • Manufacturer
    General Motors
Make sure this part fits
$395.29 MSRP: $590.86
You Save: $195.57 (34%)
Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number88983256
    Part DescriptionPipe, Fuel Tank Filler; Fuel Tank Filler Neck; Fuel Filler Hose
    Item Dimensions44.7 x 13.6 x 6.9 inches
    Item Weight1.10 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU88983256
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004 Buick RainierCXL, CXL Plus6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2004 Chevrolet TrailblazerLS, LT, LTZ, North Face6 Cyl 4.2 L GAS
    2002-2004 Chevrolet Trailblazer EXTLS, LT, North Face6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2004 GMC EnvoySLE, SLT6 Cyl 4.2 L GAS
    2002-2004 GMC Envoy XLSLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2004 GMC Envoy XUVSLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is 88983256 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 88983256 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the fuel filler hose on Buick Rainier? Posted by Customer
    A:
    The replacement process for the Fuel Filler Hose begins with removing both the fuel fill cap and fuel fill pipe housing. Raise the vehicle securely while removing the fuel fill pipe bracket nut. The procedure begins with unbolting the fuel fill pipe ground strap then loosening the fuel hose clamp. The separation of the fuel hose must occur from the tank while using a cap to seal the exposed Fuel Tank end. Start by cutting off the push pin fastener then remove the fuel filler pipe from its place on the vehicle. To reinstall the pipe fit it into position on the vehicle and fasten it by using the push pin fastener . Before filling the tank uncork it and attach the fuel hose while tightening the fuel fill hose clamp to 2.5 n.m (22 lb in). Secure the ground strap bolt for the fuel fill pipe by tightening it to 10 n.m (89 lb in). Tighten the fuel fill pipe bracket nut with a torque of 10 n.m corresponding to 89 lb in at the bottom of the vehicle. Reinstall both the fuel fill pipe housing along with the fuel fill cap at the end of the process.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to service and repair the fuel filler hose on Chevrolet Trailblazer? Posted by Customer
    A:
    Start the repair process of the Fuel Filler Hose by taking out the fuel filler cap and fuel fill pipe housing. Beginning the procedure requires the vehicle to be raised while removing the fuel fill pipe bracket. Start the procedure by striking the fuel fill pipe ground strap bolt loose before loosening the hose clamp then detaching the fuel fill hose from the pipe. Continue by taking out the fuel fill pipe before sealing the exposed fuel fill hose end. According to service precautions with fastener notice, install the fuel fill pipe through the fuel fill hose after uncapping it. Position the fuel fill hose to the fuel fill pipe and use the fuel fill hose clamp to fasten it at 2.5 n.m (22 lb in). Fasten the fuel fill pipe ground strap bolt while securing it to 10 n.m (89 lb in). Lower the car while you connect the fuel fill pipe bracket nut through its installation steps until it reaches 10 n.m torques (89 lb in torque). The procedure ends with placing the fuel fill pipe housing followed by installation of the fuel filler cap.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done with the fuel hose for the 2003 GMC Envoy? Posted by Customer
    A:
    Separate the fuel hose from the tank and cap the open end of the fuel tank.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Filler Hose
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 88983256, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 88983256 Filler Neck. It is sometimes referred to as GM Fuel Filler Hose. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 88983256 Filler Neck. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery