Make sure this part fits

GM 26100270
Pipe, Driver Side

2002-2009 GM

Customer Questions & Expert Answers (12)
GM 26100270 Pipe, Driver Side
GM 26100270 Pipe, Driver Side
  • Part Description
    Pipe Kit, Steering Gear
  • Position
    Driver Side
  • Replaces
    26089594
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2007 Buick RainierCXL, CXL Plus6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2003-2006 Chevrolet SSRBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2009 Chevrolet TrailblazerBase, LS, LT, LTZ, North Face, SS6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Trailblazer EXTLS, LT, North Face6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2009 GMC EnvoyDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2006 GMC Envoy XLDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2004-2005 GMC Envoy XUVSLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 26100270 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 26100270 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done with the power steering hose assembly bracket for the 2007 Buick Rainier? Posted by Customer
    A:
    Remove the power steering hose assembly bracket retaining bolt at the wheel well and the bracket itself.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be removed at the wheel well for the 2005 Buick Rainier? Posted by Customer
    A:
    Remove the power steering hose assembly bracket retaining bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the final step for connecting the power steering hoses for the 2006 Buick Rainier? Posted by Customer
    A:
    Install the power steering hose assembly to the front crossmember bracket mounting bolt, tightening it to 10 Nm (89 inch lbs.), raise the vehicle, and connect the power steering cooler hose and pressure hose to the pump, tightening the bolt to 25 Nm (18 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What needs to be removed from the power steering gear for the 2003 Chevrolet SSR? Posted by Customer
    A:
    Remove the power steering hose assembly mounting bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the next step after lowering for the 2005 Chevrolet SSR? Posted by Customer
    A:
    Disconnect the power steering pressure and return hose from the power steering pump.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the next step after removing the bolts for the 2004 GMC Envoy? Posted by Customer
    A:
    Disconnect the hose assembly from the power steering gear and remove it from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the final step in removing the power steering hose assembly for the 2003 GMC Envoy? Posted by Customer
    A:
    Take the power steering hose assembly out of the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after extracting the power steering hose assembly for the 2008 Chevrolet Trailblazer? Posted by Customer
    A:
    Raise and support the vehicle again and clean the power steering gear inlet and outlet ports thoroughly to avoid contamination.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    How do you disconnect the power steering hose assembly from the power steering gear for the 2002 Chevrolet Trailblazer? Posted by Customer
    A:
    Remove it from the power steering gear retaining bolt, then disconnect it from the power steering gear.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the next step after disconnecting the power steering hoses for the 2009 GMC Envoy? Posted by Customer
    A:
    Disconnect the power steering pressure hose and cooler hose from the power steering pump, then lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What needs to be removed at the wheel well for the 2008 GMC Envoy? Posted by Customer
    A:
    Remove the power steering hose assembly bracket retaining bolt and the bracket itself.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Pipe, Driver Side 26100270 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 26100270 Pipe, Driver Side is available in the market under the name GM Power Steering Hose. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 26100270 Pipe, Driver Side fits certain Chevrolet SSR, Trailblazer, Trailblazer EXT models, as well as GMC Envoy, Envoy XL, Envoy XUV. Additionally, it is compatible with Buick Rainier and Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 26100270 maintains top performance when functioning as the Pipe Kit, Steering Gear unit at its Driver Side. The component 26100270 is constructed from durable material and its dimensions span 3.8 x 23.4 x 2.1 inches while weighing 0.60 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Pipe Kit, Hydraulic Steering Gear Pressure. The part 26100270 has available replacement options 26089594. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.