Make sure this part fits

GM 26100271
Pipe, Passenger Side

2002-2009 GM

Customer Questions & Expert Answers (12)
GM 26100271 Pipe, Passenger Side
GM 26100271 Pipe, Passenger Side
  • Part Description
    Pipe Kit, Steering Gear; Power Steering Hose
  • Position
    Passenger Side
  • Replaces
    26089595
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2007 Buick RainierCXL, CXL Plus6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2003-2006 Chevrolet SSRBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2009 Chevrolet TrailblazerBase, LS, LT, LTZ, North Face, SS6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Trailblazer EXTLS, LT, North Face6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2009 GMC EnvoyDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2006 GMC Envoy XLDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2004-2005 GMC Envoy XUVSLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 26100271 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 26100271 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How should the power steering cooler hose and pressure hose be secured to the power steering pump for the 2005 Buick Rainier? Posted by Customer
    A:
    Tighten the fitting to 25 Nm (18 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the next step after lowering for the 2007 Buick Rainier? Posted by Customer
    A:
    Remove the power steering hose assembly to front crossmember bracket mounting bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    How do you remove the power steering hose assembly for the 2006 Buick Rainier? Posted by Customer
    A:
    Remove the power steering hose assembly bracket from the wheel well and the retaining bolts from the frame brackets, then take out the hose assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be positioned underneath before starting the replacement for the 2003 Chevrolet SSR? Posted by Customer
    A:
    Position a drain pan underneath.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after disconnecting the power steering hose assembly for the 2005 Chevrolet SSR? Posted by Customer
    A:
    Disconnect the power steering return hose and power steering cooler hose from the power steering cooler.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done with the engine control module (ECM) for the 2008 Chevrolet Trailblazer? Posted by Customer
    A:
    Remove the ECM from the ECM mounting bracket and position it out of the way.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after reinstalling the fuse block for the 2003 GMC Envoy? Posted by Customer
    A:
    Raise the vehicle again to install the power steering return hose and power steering cooler hose to the power steering cooler.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the next step after reinstalling the power steering gear for the 2004 GMC Envoy? Posted by Customer
    A:
    Connect the hose assembly to the power steering gear bolt and tighten it to 12 Nm (106 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done with the battery cables for the 2009 GMC Envoy? Posted by Customer
    A:
    Disconnect the negative battery cable and positive battery cable from the fuse block.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    How do you install the new oil seals for the 2002 Chevrolet Trailblazer? Posted by Customer
    A:
    Use the same tool (J44586) to install the new oil seals.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the first step to replace the power steering gear inlet and outlet hose on a 4.2L engine for the 2008 GMC Envoy? Posted by Customer
    A:
    Begin by raising and supporting the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Pipe, Passenger Side 26100271 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 26100271 Pipe, Passenger Side is available in the market under the name GM Power Steering Hose. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 26100271 Pipe, Passenger Side fits certain Chevrolet SSR, Trailblazer, Trailblazer EXT models, as well as GMC Envoy, Envoy XL, Envoy XUV. Additionally, it is compatible with Buick Rainier and Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 26100271 maintains top performance when functioning as the Pipe Kit, Steering Gear; Power Steering Hose unit at its Passenger Side. The component 26100271 is constructed from durable material and its dimensions span 3.8 x 23.6 x 2.1 inches while weighing 1.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Pipe Kit, Hydraulic Steering Gear Pressure. The part 26100271 has available replacement options 26089595. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.