Make sure this part fits

GM 88967261
Rotor

1998-2005 GM

Customer Questions & Expert Answers (16)
GM 88967261 Rotor
  • Part Description
    Rotor, Front And Rear Wheel Brake; Brake Rotor
  • Position
    Rear
  • Replaces
    18023592, 18040482
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2005 Buick LeSabreCustom, Limited6 Cyl 3.8 L GAS
    2004-2005 Buick Park AvenueUltra6 Cyl 3.8 L GAS
    2000-2005 Cadillac DeVilleBase, DHS, DTS, Protection Series8 Cyl 4.6 L GAS
    1998-2004 Cadillac SevilleSLS, STS8 Cyl 4.6 L GAS
    2004-2005 Pontiac BonnevilleGXP, SE, SLE6 Cyl 3.8 L GAS, 8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is 88967261 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 88967261 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after each cut during the refinishing process for the 2004 Buick Park Avenue? Posted by Customer
    A:
    Inspect the thickness after each cut and replace the rotor if it exceeds minimum thickness.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Disc
    Q:
    What should be done before installing the new brake rotor for the 2004 Buick Park Avenue? Posted by Customer
    A:
    Clean any rust or contaminants from the wheel bearing flange and the brake rotor mating surfaces.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Disc
    Q:
    What should be removed after raising for the 2004 Cadillac DeVille? Posted by Customer
    A:
    Remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Disc
    Q:
    What should be done after removing the brake caliper for the 2002 Cadillac DeVille? Posted by Customer
    A:
    Remove the brake caliper and bracket from the vehicle, ensuring the caliper assembly is supported away from the rotor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Disc
    Q:
    What is the procedure after cleaning the mating surfaces for the 2000 Cadillac DeVille? Posted by Customer
    A:
    Install the rotor over the wheel studs onto the wheel bearing flange, followed by the installation of the brake caliper bracket and the brake caliper assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Disc
    Q:
    What should be inspected before installing the brake rotor for the 2004 Cadillac DeVille? Posted by Customer
    A:
    Inspect the mating surfaces to ensure they are free of debris.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Disc
    Q:
    What are the final steps after installing the brake rotor for the 2005 Cadillac DeVille? Posted by Customer
    A:
    Install the brake caliper bracket assembly, reattach the tire and wheel assembly, lower the vehicle, and if applicable, burnish the pads and rotors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Disc
    Q:
    What action should be taken if the LRO exceeds specifications for the 2003 Cadillac DeVille? Posted by Customer
    A:
    Refinishing may be necessary to achieve true parallelism.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Disc
    Q:
    What should be measured if the brake rotor was part of a brake system repair for the 2004 Cadillac Seville? Posted by Customer
    A:
    Measure the assembled lateral runout (LRO) of the brake rotor to ensure optimum performance.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Disc
    Q:
    What is the first step to replace the rear brake rotor for the 2001 Cadillac Seville? Posted by Customer
    A:
    First, remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Disc
    Q:
    What is the final step after installing the new brake rotor for the 2001 Cadillac DeVille? Posted by Customer
    A:
    Reinstall the brake caliper and bracket as an assembly, followed by the tire and wheel assembly, and then lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Disc
    Q:
    What should be marked before removing the brake rotor for the 2003 Cadillac Seville? Posted by Customer
    A:
    Mark the relationship of the rotor to the hub.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Disc
    Q:
    What is the first step to replace the rear brake rotor for the 2004 Cadillac Seville? Posted by Customer
    A:
    Begin by raising and supporting the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Disc
    Q:
    What should be inspected on each rotor for the 2002 Cadillac Seville? Posted by Customer
    A:
    Thickness and surface wear to ensure they can be refinished while remaining above the minimum allowable thickness.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Disc
    Q:
    Why is it important to clean the wheel bearing flange and brake rotor mating surfaces for the 2000 Cadillac Seville? Posted by Customer
    A:
    It is crucial to clean them to prevent increased lateral runout of the rotor and brake pulsation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Disc
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Rotor 88967261 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 88967261 Rotor is available in the market under the name GM Brake Disc. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 88967261 Rotor fits certain Cadillac DeVille, Seville models, as well as Buick Park Avenue. Additionally, it is compatible with Pontiac Bonneville models.
The original GM component designated by manufacturer part number 88967261 maintains top performance when functioning as the Rotor, Front And Rear Wheel Brake; Brake Rotor unit at its Rear. The component 88967261 is constructed from durable material and its dimensions span 13.9 x 12.6 x 3.8 inches while weighing 12.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 88967261 has available replacement options 18023592, 18040482. Each vehicle needs 2 units of the part marked as SKU 88967261. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.