Make sure this part fits

GM 25780728
Lock Actuator, Passenger Side

1997-2008 GM

Customer Questions & Expert Answers (23)
GM 25780728 Lock Actuator, Passenger Side
GM 25780728 Lock Actuator, Passenger Side
  • Part Description
    Lock Assembly-Rear Side Door Front; Door Lock Actuator Motor; Door Latch Assembly; Door Lock Actuator; Door Lock
  • Position
    Passenger Side
  • Replaces
    10324011, 10329148, 10316339, 10410403, 88958114, 10352388, 10438262, 15841657
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number25780728
    Part DescriptionLock Assembly-Rear Side Door Front; Door Lock Actuator Motor; Door Latch Assembly; Door Lock Actuator; Door Lock
    Other NamesLock; Latch, Door Lock Remote Control; Latch, Door Lock Remote
    Item Dimensions13.2 x 10.7 x 5.4 inches
    Item Weight2.90 Pounds
    PositionPassenger Side
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces10324011, 10329148, 10316339, 10410403, 88958114, 10352388, 10438262, 15841657
    ManufacturerGeneral Motors
    SKU25780728
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2007 Buick TerrazaCX, CXL6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2005-2008 Chevrolet UplanderBase, LS, LT6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    1997-2005 Chevrolet VentureBase, LS, LT, Plus, Value, Warner Bros.6 Cyl 3.4 L GAS
    1997-2004 Oldsmobile SilhouetteBase, GL, GLS, GS, Premiere6 Cyl 3.4 L GAS
    1999-2006 Pontiac MontanaBase, SV66 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    1997-1998 Pontiac Trans SportBase, Montana6 Cyl 3.4 L GAS
    2005-2007 Saturn Relay1, 2, 36 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25780728 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25780728 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be reinstalled after the latch is secured for the 2006 Buick Terraza? Posted by Customer
    A:
    Reinstall the sliding door water deflector and the inner trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What does removing the PSD 15A fuse do for the 2007 Buick Terraza? Posted by Customer
    A:
    It interrupts the low current logic power for both the LH and RH power sliding door modules, rendering them inoperative.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the first step to replace the front door lock actuator for the 2006 Buick Terraza? Posted by Customer
    A:
    Remove the front door module.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be done after positioning the actuator to the door for the 2007 Buick Terraza? Posted by Customer
    A:
    Install the rivets, ensuring they are secured.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the final step in the process for the 2005 Buick Terraza? Posted by Customer
    A:
    Reinstall the front door module.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the first step to replace the lock actuator for the power sliding door for the 2006 Buick Terraza? Posted by Customer
    A:
    Disable the PSD system by removing the PSD 15A fuse from the instrument panel fuse block.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be done after detaching the actuator for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    Unhook the actuator rod from the latch release actuator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be done after removing the inner trim panel and water deflector for the 2005 Chevrolet Venture? Posted by Customer
    A:
    Next, take out the sliding door latch screws.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be removed after the inner trim panel for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    The sliding door water deflector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the next step after removing those components for the 2002 Chevrolet Venture? Posted by Customer
    A:
    Take out the front door lock actuator from the front door lock.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the final step in the replacement process for the 2005 Chevrolet Uplander? Posted by Customer
    A:
    Finally, connect the electrical connector to the sliding door lock actuator and reinstall the sliding door lock.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What are the final steps after installing the rear lock for the 2001 Chevrolet Venture? Posted by Customer
    A:
    Reinstall the sliding door water deflector and the sliding door inner trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock
    Q:
    What should be done after removing the sliding door lock for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    Disconnect the electrical connector from the sliding door lock actuator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    How do you remove the rear lock from the sliding door for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Remove the rear lock from the sliding door after unhooking the lock rod.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock
    Q:
    What should be done after removing the inner trim panel and water deflector for the 2002 Chevrolet Venture? Posted by Customer
    A:
    Disconnect the power sliding door latch release actuator electrical connector and remove the screws securing the actuator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the first step to replace the front side door lock for the 2001 Chevrolet Venture? Posted by Customer
    A:
    Remove the front door lock module.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    How do you install the new actuator for the 2004 Chevrolet Venture? Posted by Customer
    A:
    First, attach the actuator rod to the new actuator, then position the actuator onto the power sliding door and secure it with the screws.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    How do you secure the actuator for the 2001 Chevrolet Venture? Posted by Customer
    A:
    Secure the actuator with screws, tightening them to 10 N.m (89 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the first step to replace the Power Door Lock Actuator in the front door for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Remove the door module.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    How do you install the new sliding door lock actuator for the 2005 Chevrolet Venture? Posted by Customer
    A:
    Position the new sliding door lock actuator onto the sliding door lock and secure it with rivets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be removed after the inner trim panel for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Then, remove the sliding door water deflector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the first step to replace the sliding door latch for the 2001 Chevrolet Venture? Posted by Customer
    A:
    First, remove the sliding door inner trim panel and the sliding door water deflector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 25780728, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 25780728 Lock Actuator, Passenger Side. It is sometimes referred to as GM Door Lock, GM Door Lock Actuator, GM Door Latch Assembly. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 25780728 Lock Actuator, Passenger Side. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery