Make sure this part fits

GM 10347140
Lock, Rear Driver Side

1997-2008 GM

Customer Questions & Expert Answers (23)
GM 10347140 Lock, Rear Driver Side
  • Part Description
    Lock Assembly-Rear Side Door Rear; Door Latch Assembly; Door Lock
  • Position
    Rear Driver Side
  • Replaces
    10321724, 16675909
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2007 Buick TerrazaCX, CXL6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2005-2008 Chevrolet UplanderBase, LS, LT6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    1997-2005 Chevrolet VentureBase, LS, LT, Plus, Value, Warner Bros.6 Cyl 3.4 L GAS
    1997-2004 Oldsmobile SilhouetteBase, GL, GLS, GS, Premiere6 Cyl 3.4 L GAS
    1999-2006 Pontiac MontanaBase, SV66 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    1997-1998 Pontiac Trans SportBase, Montana6 Cyl 3.4 L GAS
    2005-2007 Saturn Relay1, 2, 36 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 10347140 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10347140 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after removing the fuse for the 2007 Buick Terraza? Posted by Customer
    A:
    Remove the sliding door inner trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    How do you unhook the latch from the door for the 2006 Buick Terraza? Posted by Customer
    A:
    Unhook the latch/lock rod when the latch is loose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What do you do once the actuator is free for the 2005 Buick Terraza? Posted by Customer
    A:
    Position the new front door lock actuator to the front door lock and install the screws, tightening them to 2 Nm (18 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the first step in the installation process for the 2007 Buick Terraza? Posted by Customer
    A:
    Attach the actuator rod to the actuator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the first step to replace the front door lock actuator for the 2006 Buick Terraza? Posted by Customer
    A:
    Remove the front door module.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be done after disconnecting the electrical connector for the 2006 Buick Terraza? Posted by Customer
    A:
    Remove the rivets securing the actuator and take out the actuator itself.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the first step to replace the sliding door lock actuator for the 2005 Chevrolet Venture? Posted by Customer
    A:
    First, remove the sliding door lock and disconnect the wiring harness connector from the sliding door lock actuator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the next step after removing those components for the 2002 Chevrolet Venture? Posted by Customer
    A:
    Take out the front door lock actuator from the front door lock.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be done after securing the front door lock for the 2001 Chevrolet Venture? Posted by Customer
    A:
    Reconnect the front door inside handle rods and reinstall the front door lock module.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be done after removing the trim panel and water deflector for the 2001 Chevrolet Venture? Posted by Customer
    A:
    Disconnect the power sliding door latch release actuator electrical connector and remove the screws securing the actuator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What are the final steps after installing the rear lock for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Reinstall the sliding door water deflector and the sliding door inner trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock
    Q:
    What is the first step to replace the power sliding door lock actuator for the 2002 Chevrolet Venture? Posted by Customer
    A:
    Begin by removing the sliding door inner trim panel and the sliding door water deflector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the next step after removing the water deflector for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Take out the sliding door latch screws.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be ensured after tightening the screws for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    Ensure the rear latch lock rod is secured into the latch rod insulator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the first step in the installation process for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Attach the lock actuator to the front door lock.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    How do you remove the sliding door rear lock for the 2001 Chevrolet Venture? Posted by Customer
    A:
    Remove the sliding door rear lock from the sliding door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock
    Q:
    How do you install the new sliding door lock actuator for the 2005 Chevrolet Uplander? Posted by Customer
    A:
    Position the new sliding door lock actuator to the sliding door lock, aligning the mounting holes, and secure it by installing the rivets that attach the actuator to the actuator bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    How do you install the new sliding door latch for the 2001 Chevrolet Venture? Posted by Customer
    A:
    Position the new sliding door latch onto the door and hook the latch/lock rod back to it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be done after securing the actuator for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    Reconnect the electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    How do you install the new sliding door latch for the 2005 Chevrolet Venture? Posted by Customer
    A:
    Position the new sliding door latch onto the door and hook the latch/lock rod to it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the torque specification for tightening the screws for the 2004 Chevrolet Venture? Posted by Customer
    A:
    Tighten the screws to 10 N.m (89 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the final step to complete the process for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    Restore the PSD system by reinstalling the 15A fuse.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Lock, Rear Driver Side 10347140 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 10347140 Lock, Rear Driver Side is available in the market under the name GM Door Lock, Door Lock Actuator, Door Latch Assembly. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 10347140 Lock, Rear Driver Side fits certain Chevrolet Uplander, Venture models, as well as Buick Terraza. Additionally, it is compatible with Pontiac Montana, Trans Sport and Oldsmobile Silhouette models.
The original GM component designated by manufacturer part number 10347140 maintains top performance when functioning as the Lock Assembly-Rear Side Door Rear; Door Latch Assembly; Door Lock unit at its Rear Driver Side. The component 10347140 is constructed from durable material and its dimensions span 6.3 x 3.3 x 3.2 inches while weighing 1.00 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Latch; Lock, Rear Side Door; Lock, Door Lock. The part 10347140 has available replacement options 10321724, 16675909. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.