Make sure this part fits

GM 88957176
Outer Tie Rod

2004-2009 GM

Customer Questions & Expert Answers (7)
GM 88957176 Outer Tie Rod
  • Part Description
    Rod Kit, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End
  • Position
    Outer
  • Manufacturer
    General Motors
Make sure this part fits
$86.33 MSRP: $137.07
You Save: $50.74 (38%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number88957176
    Part DescriptionRod Kit, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End
    Other NamesRod Kit, Steering Tie Rod Outer
    Item Dimensions13.1 x 4.3 x 4.4 inches
    Item Weight1.60 Pounds
    PositionOuter
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU88957176
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2009 Cadillac SRXBase6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
    2005-2007 Cadillac STSBase, V6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is 88957176 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 88957176 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Rack and Pinion Outer Tie Rod End on Cadillac STS? Posted by Customer
    A:
    The first step for replacing a Rack And Pinion outer Tie Rod End includes raising and adequately supporting the vehicle. Start by removing the tire and wheel followed by loosening the jam nut of the outer tie rod, then take out its retaining nut. Follow the application steps with the steering linkage and tie rod puller (J24319-B) to detach the outer tie rod from the Steering Knuckle and withdraw it from the inner tie rod. Keep records of the removal turns that should match during reinstallation. To install the components link the outer tie rod to the inner tie rod without adjusting the jam nut while implementing the same number of turning noted during uninstallation. Begin by attaching the outer tie rod to the Steering Knuckle before installing the outer tie rod retaining nut which needs to be tightened to 70 nm (52 ft. Lbs.). Place your tire and wheel before lowering the vehicle for adjusting the front toe.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you connect the outer tie rod to the steering knuckle for the 2006 Cadillac SRX? Posted by Customer
    A:
    Connect the outer tie rod to the steering knuckle and install the outer tie rod retaining nut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Tie Rod
    Q:
    What is the next step after disconnecting the outer tie rod from the steering knuckle for the 2007 Cadillac SRX? Posted by Customer
    A:
    Remove the outer tie rod from the inner tie rod.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Tie Rod End
    Q:
    How should the rack and pinion outer tie rod end be installed for the 2009 Cadillac SRX? Posted by Customer
    A:
    Install it to the steering linkage inner tie rod with the same number of complete turns noted during removal, without tightening the inner tie rod nut at this stage.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Tie Rod
    Q:
    How do you disconnect the rack and pinion outer tie rod end from the steering knuckle for the 2008 Cadillac SRX? Posted by Customer
    A:
    Use the steering linkage and tie rod puller (J 24319-B) and note the number of complete turns made during removal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Tie Rod End
    Q:
    How should the outer tie rod be installed for the 2007 Cadillac STS? Posted by Customer
    A:
    Use the same number of turns noted during removal to install the outer tie rod to the inner tie rod without tightening the jam nut at this time.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Tie Rod End
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 88957176, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 88957176 Outer Tie Rod. It is sometimes referred to as GM Tie Rod, GM Tie Rod End. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 88957176 Outer Tie Rod. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Cadillac parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery