Make sure this part fits

GM 25887140
Outer Seal

2005-2008 GM

Customer Questions & Expert Answers (9)
GM 25887140 Outer Seal
  • Part Description
    Seal, Hood Panel
  • Position
    Rear Outer
  • Replaces
    15107449
  • Manufacturer
    General Motors
Make sure this part fits
$13.11
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2007 Buick TerrazaCX, CXL6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2005-2008 Chevrolet UplanderBase, LS, LT6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2005-2006 Pontiac MontanaSV66 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    2005-2007 Saturn Relay1, 2, 36 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25887140 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25887140 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How should the new weatherstrip be positioned on the pinch-weld flange for the 2006 Buick Terraza? Posted by Customer
    A:
    Align the locator dot to the upper front corner and upper rear corners, noting that the pink dot indicates a long wheel base and the yellow dot indicates a short wheel base.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should heat be applied to the sliding door auxiliary weatherstrip for the 2005 Buick Terraza? Posted by Customer
    A:
    Use a heat gun to heat the weatherstrip, keeping it 150 mm (6 in) from the surface and applying heat in a circular motion for about 30 seconds.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after heating the weatherstrip for the 2007 Buick Terraza? Posted by Customer
    A:
    Carefully peel the weatherstrip from the panel surface using a flat-bladed tool, ensuring not to damage the paint.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step after disabling the PSD system for the 2006 Buick Terraza? Posted by Customer
    A:
    Remove the sliding door swing out window and pull the sliding door window weatherstrip from the pinch-weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step after installing the weatherstrip for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    Restore the power sliding door system by reinstalling the PSD 15A fuse into the instrument panel fuse block, which will require both power sliding door modules to learn the full open and closed positions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the new liftgate weatherstrip for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    Apply the new liftgate weatherstrip sealing strip to the pinch-weld flange if necessary, then align the blue dot on the weatherstrip to the top center of the liftgate opening pinch-weld flange and the white dots to the top corners.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step in the process for the 2005 Chevrolet Uplander? Posted by Customer
    A:
    Reinstall the rear quarter window using the appropriate replacement procedure for either the A20 Power or A20 Manual.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should the adhesive backing of the weatherstrip be handled during installation for the 2006 Chevrolet Uplander? Posted by Customer
    A:
    Peel the backing from the front end of the weatherstrip without touching the adhesive backing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Outer Seal 25887140 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25887140 Outer Seal is available in the market under the name GM Weather Strip. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25887140 Outer Seal fits certain Chevrolet Uplander models, as well as Buick Terraza. Additionally, it is compatible with Pontiac Montana and Saturn Relay models.
The original GM component designated by manufacturer part number 25887140 maintains top performance when functioning as the Seal, Hood Panel unit at its Rear Outer. The component 25887140 is constructed from durable material and its dimensions span 7.3 x 4.8 x 3.2 inches while weighing 0.80 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 25887140 has available replacement options 15107449. Each vehicle needs 2 units of the part marked as SKU 25887140. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.