Make sure this part fits

GM 15238491
Seal Strip, Front

1997-2008 GM

Customer Questions & Expert Answers (15)
GM 15238491 Seal Strip, Front
  • Part Description
    Sealing Strip, Front Door Window Channel; Weatherstrip; Door Seal
  • Position
    Front
  • Replaces
    10272862, 15194212
  • Manufacturer
    General Motors
Make sure this part fits
$72.43 MSRP: $90.55
You Save: $18.12 (21%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number15238491
    Part DescriptionSealing Strip, Front Door Window Channel; Weatherstrip; Door Seal
    Other NamesBelt Weatherstrip; Inner Seal; Sealing Strip, Side Door Window Sash
    Item Dimensions33.8 x 2.6 x 1.1 inches
    Item Weight0.80 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces10272862, 15194212
    Require Quantity2
    ManufacturerGeneral Motors
    SKU15238491
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2007 Buick TerrazaCX, CXL6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2005-2008 Chevrolet UplanderBase, LS, LT6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    1997-2004 Chevrolet VentureBase, LS, LT, Plus, Value, Warner Bros.6 Cyl 3.4 L GAS
    1997-2004 Oldsmobile SilhouetteBase, GL, GLS, GS, Premiere6 Cyl 3.4 L GAS
    1999-2006 Pontiac MontanaBase, SV66 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    1997-1998 Pontiac Trans SportBase, Montana6 Cyl 3.4 L GAS
    2005-2007 Saturn Relay1, 2, 36 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 15238491 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15238491 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should you do with the loose end of the weatherstrip for the 2006 Buick Terraza? Posted by Customer
    A:
    Join the loose end of the weatherstrip to the seated end.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after heating the weatherstrip for the 2005 Buick Terraza? Posted by Customer
    A:
    Carefully peel the weatherstrip from the panel surface with a flat-bladed tool, ensuring not to damage the paint.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step after warming the body panel for the 2007 Buick Terraza? Posted by Customer
    A:
    Peel the backing from the front end of the sliding door auxiliary weatherstrip without touching the adhesive backing, then press the weatherstrip to the body.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after installing the new weatherstrip for the 2006 Buick Terraza? Posted by Customer
    A:
    Reinstall the sliding door swing out window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should heat be applied to the sliding door auxiliary weatherstrip for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Use a heat gun to heat the weatherstrip, keeping it 150 mm (6 in) from the surface and applying heat in a circular motion for about 30 seconds.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should the adhesive backing of the weatherstrip be handled during installation for the 2006 Chevrolet Uplander? Posted by Customer
    A:
    Peel the backing from the front end of the weatherstrip without touching the adhesive backing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do with the tear strip at the liftgate body wedge for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    Remove the tear strip, which should pull the inner lip of the weatherstrip over the interior trim; spooning may be required for proper installation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done if reusing the old hood rear weatherstrips for the 2004 Chevrolet Venture? Posted by Customer
    A:
    Apply new adhesive GM P/N 12345096.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should the rear quarter window weatherstrip be installed for the 2005 Chevrolet Uplander? Posted by Customer
    A:
    Install the forward joint of the rear quarter window weatherstrip to the vehicle, ensuring it is aligned 50 mm (1.96 in) from the front lower window opening radius.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step after installing the weatherstrip for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    Restore the power sliding door system by reinstalling the PSD 15A fuse into the instrument panel fuse block, which will require both power sliding door modules to learn the full open and closed positions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What needs to be done to the quarter window pinch-weld flange for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Clean all adhesive from the quarter window pinch-weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What tool is needed to remove the bottom auxiliary weatherstrip from the front door for the 2003 Chevrolet Venture? Posted by Customer
    A:
    Use the Door Trim Pad and Garnish Clip Remover (J 38778).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after installing the weatherstrip for the 2001 Chevrolet Venture? Posted by Customer
    A:
    Reinstall the rear quarter window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What if using the old weatherstrip for the 2002 Chevrolet Venture? Posted by Customer
    A:
    Hand spoon the lip over the trim.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 15238491, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 15238491 Seal Strip, Front. It is sometimes referred to as GM Weather Strip. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 15238491 Seal Strip, Front. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery