Make sure this part fits

GM 25808855
Belt Weatherstrip, Rear Outer Passenger Side

2002-2009 GM

Customer Questions & Expert Answers (23)
GM 25808855 Belt Weatherstrip, Rear Outer Passenger Side
  • Part Description
    Sealing Strip Assembly-Rear Side Door Window Outer
  • Position
    Rear Outer Passenger Side
  • Replaces
    15129779, 15089914, 15155434, 15176789, 15946952
  • Manufacturer
    General Motors
Make sure this part fits
$78.33 MSRP: $112.09
You Save: $33.76 (31%)
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2007 Buick RainierCXL, CXL Plus6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2009 Chevrolet TrailblazerBase, LS, LT, LTZ, North Face, SS6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2009 GMC EnvoyDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25808855 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25808855 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you remove the sealing strip for the 2006 Buick Rainier? Posted by Customer
    A:
    Lift upward on the rear edge of the sealing strip and remove it from the pinch-weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step after installing the new weatherstrip for the 2007 Buick Rainier? Posted by Customer
    A:
    Reinstall the sunroof window to the sunroof module assembly and verify that there are no air or water leaks.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you align the weatherstrip during installation for the 2005 Buick Rainier? Posted by Customer
    A:
    Align the paint dots on the weatherstrip with the sheet metal joints of the window channel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be removed after securing the sliding hinge panel for the 2004 Buick Rainier? Posted by Customer
    A:
    Remove the pushpins that hold the mid gate weatherstrip mold to the body.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step after detaching the lower molds for the 2004 Buick Rainier? Posted by Customer
    A:
    Detach the weatherstrip from the end gate opening flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    Where should the bond joint be positioned during installation for the 2005 Chevrolet Trailblazer? Posted by Customer
    A:
    The bond joint should be at the lower center of the door opening.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should the weatherstrip be positioned during installation for the 2003 Chevrolet Trailblazer? Posted by Customer
    A:
    Begin at the top center of the liftgate window opening, positioning the weatherstrip to the pinch-weld flange and working down both sides towards the bottom center.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the new sunroof window weatherstrip for the 2008 Chevrolet Trailblazer? Posted by Customer
    A:
    Carefully place the new sunroof window weatherstrip onto the perimeter of the sunroof window, ensuring it is fully seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should the weatherstrip be aligned during installation for the 2007 GMC Envoy? Posted by Customer
    A:
    Align the weatherstrip to the door opening, ensuring the 2 dots are positioned on the upper right and left sides, and the bond joint is at the lower center of the door opening.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the sealing strip for the 2002 GMC Envoy? Posted by Customer
    A:
    Place the sealing strip onto the pinch-weld flange at the rear edge of the door, ensuring it is fully seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the auxiliary front door weatherstrip for the 2006 Chevrolet Trailblazer? Posted by Customer
    A:
    Open the side doors on either the right or left side.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What tool can be used to ensure full engagement of the weatherstrip for the 2002 Chevrolet Trailblazer? Posted by Customer
    A:
    Use a rubber mallet to ensure full engagement of the weatherstrip to the pinch-weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    Is there anything else that may be necessary to complete the installation for the 2009 GMC Envoy? Posted by Customer
    A:
    Yes, spooning of the weatherstrip may be necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the rear hood weatherstrip seal for the 2004 Chevrolet Trailblazer? Posted by Customer
    A:
    Open the hood and remove the rear hood seal from the air inlet grille panel studs.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the new seal for the 2002 Chevrolet Trailblazer? Posted by Customer
    A:
    Install it onto the inlet grille panel studs.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step in the process for the 2003 GMC Envoy? Posted by Customer
    A:
    Reinstall the push pin retainers to the front door sealing weatherstrip at the base of the pillar and close the doors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you remove the weatherstrip for the 2004 GMC Envoy? Posted by Customer
    A:
    Squeeze the weatherstrip together and pull it out of the front door window channel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step after detaching the lower molds for the 2005 GMC Envoy? Posted by Customer
    A:
    Detach the weatherstrip from the endgate opening flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do after opening the doors for the 2009 Chevrolet Trailblazer? Posted by Customer
    A:
    Remove the push pin retainers from the front door sealing weatherstrip at the base of the pillar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do after opening the doors for the 2008 GMC Envoy? Posted by Customer
    A:
    Remove the push pin retainers from the front door sealing weatherstrip at the base of the pillar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What follows the installation of the upper molded detail for the 2004 GMC Envoy? Posted by Customer
    A:
    Install the lower molded detail using the integral retaining pins.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    Where should the butt joint seam be installed for the 2006 GMC Envoy? Posted by Customer
    A:
    Install the butt joint seam at the center of the bottom pinch-weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Belt Weatherstrip, Rear Outer Passenger Side 25808855 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25808855 Belt Weatherstrip, Rear Outer Passenger Side is available in the market under the name GM Weather Strip. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25808855 Belt Weatherstrip, Rear Outer Passenger Side fits certain Chevrolet Trailblazer models, as well as GMC Envoy. Additionally, it is compatible with Buick Rainier and Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 25808855 maintains top performance when functioning as the Sealing Strip Assembly-Rear Side Door Window Outer unit at its Rear Outer Passenger Side. The component 25808855 is constructed from durable material and its dimensions span 25.1 x 2.1 x 0.9 inches while weighing 0.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Sealing Strip, Side Door Window Glass. The part 25808855 has available replacement options 15129779, 15089914, 15155434, 15176789, 15946952. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.