Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 25948724
Lock Actuator, Rear Driver Side

2002-2009 GM

Customer Questions & Expert Answers (20)
GM 25948724 Lock Actuator, Rear Driver Side
GM 25948724 Lock Actuator, Rear Driver Side
GM 25948724 Lock Actuator, Rear Driver Side
GM 25948724 Lock Actuator, Rear Driver Side
GM 25948724 Lock Actuator, Rear Driver Side
  • Part Description
    Lock, Rear Side Door; Door Lock Actuator Motor; Door Latch Assembly; Door Lock
  • Position
    Rear Driver Side
  • Replaces
    15076334, 15079228, 15110509
  • Manufacturer
    General Motors
Make sure this part fits
$169.32 MSRP: $253.15
You Save: $83.83 (34%)
Ships in 1-3 Business Days
1
ADD TO CART

  • 25948724 Lock Actuator, Rear Driver Side is Ref No. 6 in the diagram below

    2005 Buick Rainier Lock Actuator, Rear Driver Side Diagram for 25948724
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 25948724

  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2007 Buick RainierCXL, CXL Plus6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2009 Chevrolet TrailblazerBase, LS, LT, LTZ, North Face, SS6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Trailblazer EXTLS, LT, North Face6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2009 GMC EnvoyDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2006 GMC Envoy XLDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2004-2005 GMC Envoy XUVSLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25948724 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25948724 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the rear side door lock actuator on GMC Envoy? Posted by Customer
    A:
    The replacement of a rear side Door Lock Actuator requires the door trim panel followed by water deflector and Door Latch Assembly removal. The actuator requires removal from the lock by removing two mounting screws. You should raise and rotate the actuator away from the latch so the rubber Bumper can come off the latch before taking out the actuator from its position. Start the installation process by hooking rubber Bumper onto the latch and then moving the actuator toward the latch until the rubber Bumper is fully attached. Before installing the actuator above the latch position verify that its first gear tooth meshes correctly with the first gear tooth of the latch. Use a torque device to assemble the actuator to the lock using 2 retention screws at a torque value of 0.75 n.m (6 lb in). The final installation steps involve securing the lock to the door whereas the next step installs the water deflector followed by the door trim panel.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the front door lock actuator for the 2004 Buick Rainier? Posted by Customer
    A:
    Begin by removing the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be removed after the door trim panel for the 2007 Buick Rainier? Posted by Customer
    A:
    The water deflector and the door latch assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be removed after closing the window for the 2004 Buick Rainier? Posted by Customer
    A:
    Remove the door trim panel and the rear half of the water deflector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    How many fasteners need to be removed to secure the latch to the door for the 2007 Buick Rainier? Posted by Customer
    A:
    3 fasteners (Part Number: 123456).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the first step in the installation process for the 2007 Buick Rainier? Posted by Customer
    A:
    Attach the actuator to the latch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be reinstalled after securing the actuator for the 2009 Chevrolet Trailblazer? Posted by Customer
    A:
    Reinstall the lock to the door, followed by the water deflector, and finally, reinstall the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What are the final steps after reinstalling the lock rods for the 2002 Chevrolet Trailblazer? Posted by Customer
    A:
    Reinstall the water deflector and the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be noted before removing the lock rods for the 2002 Chevrolet Trailblazer? Posted by Customer
    A:
    Note the positions of the inside and outside handle lock rods.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the first step in the installation process for the 2005 Chevrolet Trailblazer? Posted by Customer
    A:
    Attach the actuator to the latch and position the latch back into the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    How do you ensure proper engagement of the actuator for the 2008 GMC Envoy? Posted by Customer
    A:
    Rotate the actuator toward the latch to fully engage the rubber bumper and ensure that the first tooth of the gear on the actuator aligns and interlocks properly with the first tooth of the gear on the latch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the first step to replace the power door lock actuator in the front door for the 2002 Chevrolet Trailblazer? Posted by Customer
    A:
    Begin by removing the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    How should the 3 fasteners be installed to secure the latch for the 2009 Chevrolet Trailblazer? Posted by Customer
    A:
    Install the 3 fasteners (part number: 11570329) and tighten them to 10 Nm (89 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the first step to replace the rear door lock actuator for the 2005 Chevrolet Trailblazer? Posted by Customer
    A:
    Begin by removing the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be reattached after securing the latch for the 2003 GMC Envoy? Posted by Customer
    A:
    Reattach the outside handle lock rod to the outside handle, followed by the inside door handle lock rod to the latch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the next step after engaging the rubber bumper for the 2009 GMC Envoy? Posted by Customer
    A:
    Install the actuator to the top of the latch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be done if the lock cylinder rod is equipped for the 2003 GMC Envoy? Posted by Customer
    A:
    Disconnect the lock cylinder rod from the cylinder, then remove the inside door handle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be noted before removing the lock rods from the latch for the 2009 GMC Envoy? Posted by Customer
    A:
    Note the positions of the inside and outside handle lock rods.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the next step after removing the screws for the 2003 GMC Envoy? Posted by Customer
    A:
    Carefully lift and rotate the actuator to disengage the rubber bumper from the latch, then remove the actuator from the latch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Lock Actuator, Rear Driver Side 25948724 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25948724 Lock Actuator, Rear Driver Side is available in the market under the name GM Door Lock, Door Lock Actuator, Door Latch Assembly. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25948724 Lock Actuator, Rear Driver Side fits certain Chevrolet Trailblazer, Trailblazer EXT models, as well as GMC Envoy, Envoy XL, Envoy XUV. Additionally, it is compatible with Buick Rainier and Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 25948724 maintains top performance when functioning as the Lock, Rear Side Door; Door Lock Actuator Motor; Door Latch Assembly; Door Lock unit at its Rear Driver Side. The component 25948724 is constructed from durable material and its dimensions span 11.5 x 5.2 x 5.0 inches while weighing 1.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Lock Assembly; Lock; Lock, Door Lock. The part 25948724 has available replacement options 15076334, 15079228, 15110509. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.