Other Name: Lock, Front Side Door; Door Lock Actuator Motor; Door Lock Actuator; Door Lock; Lock Assembly; Lock; Lock, Door Lock
Position: Front Driver Side
Replaces: 25945746
Fits the following GMC Models:
Sierra 1500 | 2007-2012 | Denali, Hybrid, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
Sierra 2500 HD | 2007-2012 | Denali, SLE, SLT, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
Sierra 3500 HD | 2007-2012 | Denali, SLE, SLT, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
Other Name: Latch Assembly-Front Side Door; Door Lock Actuator Motor; Door Latch Assembly; Door Lock Actuator; Door Lock; Latch Assembly; Latch, Front Side Door
Position: Front Passenger Side
Fits the following GMC Models:
Canyon | 2015 | Base, SL, SLE, SLT | 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS
Other Name: Latch Assembly-Rear Side Door Lower (Right-Hand); Door Lock Actuator Motor; Door Latch Assembly; Door Lock; Lower Latch; Lock; Latch, Rear Side Door
Position: Rear Lower Passenger Side
Replaces: 52031131
Fits the following GMC Models:
Canyon | 2015-2022 | All Terrain, AT4, Base, Denali, Elevation, Elevation Standard, SL, SLE, SLT | 4 Cyl 2.5 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
Other Name: Latch Assembly-Rear Side Door; Door Lock Actuator Motor; Door Lock; Lock Assembly; Latch, Door Lock
Position: Rear Passenger Side
Replaces: 20783864
Fits the following GMC Models:
Sierra 1500 | 2007-2011 | Denali, Hybrid, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
Sierra 2500 HD | 2007-2011 | Denali, SLE, SLT, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
Sierra 3500 HD | 2007-2011 | Denali, SLE, SLT, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
Other Name: Latch Assembly-Rear Side Door; Door Lock Actuator Motor; Door Lock; Lock Assembly; Latch, Door Lock
Position: Rear Driver Side
Replaces: 20783863
Fits the following GMC Models:
Sierra 1500 | 2007-2011 | Denali, Hybrid, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
Sierra 2500 HD | 2007-2011 | Denali, SLE, SLT, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
Sierra 3500 HD | 2007-2011 | Denali, SLE, SLT, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
Q: How to replace the front Door Latch Assembly on GMC Envoy?
A: The first step to replace the front door latch requires users to fully shut the window. Take out the door trim panel alongside the rear half of the water deflector. The lock rod retaining clip should be detached from the outside Door Handle and the handle must receive the lock rod for removal. First disconnect the cylinder rod when available and afterward separate the inner Door Handle from its mountings. Before detaching the latch from the door remove the three screws which keep it in place then adjust its position for easy electrical connector disconnection. Record where the inside and outside handle lock rods sit before removing them from the latch and its following actuator. First attach the actuator to the latch after which mount the noted positions of both inside and outside lock rods. Install the latch by connecting its electrical connectors if required before reinserting it in the door. Use 3 screws to attach the latch before tightening them to 10 n.m (22 lb in). To finish the installation you must reinstall the inside Door Handle while joining the lock cylinder rod to the cylinder when present and installing the lock rod onto the outside Door Handle by using the lock rod retaining clip. You should replace the water deflector then the door trim panel.
Q: How to replace the Door Latch Assembly of the upper rear side access door on GMC Canyon?
A: The first step to replace the upper latch of the rear side access door begins with opening this door then removing the trim panel. To start the upper latch replacement process you should detach the upper latch rod from the latch by unstopping the retaining clip and after that remove the bolts 1 and 2 which secure the upper latch to the door and extract the upper latch. Put the upper latch on the rear side access door and loosely attach the lower bolts for attachment before final tightening. First secure the latch bracket against the door panel by tightening the lower bolts and after that attach the upper latch rod through the retention clips. People should finish tightening the lower bolts while the rear side access door remains closed for proper upper latch self-alignment. After setting upper latch bolts to 9 N.m (80 lb in) open the door to install the upper bolt while reinforcing it with the same torque specification. To finish the procedure you should replace the rear side access door trim panel while also closing the door.
Q: How to replace the Door Latch Assembly on the upper left side rear door on GMC Savana 2500?
A: The first step to replacing the left side rear door upper latch requires you to remove the corresponding trim panel. The first step involves separating the lock rod from the left side rear door upper latch before removing the bolts holding the latch to the door structure. The procedure demands that you remove the left side rear door upper latch after taking out the bolts securing it to the door. Fit the new left side rear door upper latch onto its position on the door through the installation process using bolts which should be tightened to 25 N.m (18 lb ft). Secure the lock rod to its position on the latch after which you can install the left side rear door trim panel.