Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 15918162
Lock Actuator, Rear Passenger Side

2004-2012 GM

Customer Questions & Expert Answers (13)
GM 15918162 Lock Actuator, Rear Passenger Side
  • Part Description
    Lock, Rear Side Door; Door Lock Actuator Motor; Door Latch Assembly; Door Lock
  • Position
    Rear Passenger Side
  • Replaces
    10395394
  • Manufacturer
    General Motors
Make sure this part fits
$180.96 MSRP: $270.55
You Save: $89.59 (34%)
Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

  • 15918162 Lock Actuator, Rear Passenger Side is Ref No. 10 in the diagram below

    2005 Chevy Colorado Lock Actuator, Rear Passenger Side Diagram for 15918162
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 15918162

  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2012 Chevrolet ColoradoBase, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    2004-2012 GMC CanyonSL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 15918162 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15918162 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the upper rear side access door latch assembly on Chevrolet Colorado? Posted by Customer
    A:
    The first step for replacing the upper rear side access door latch involves opening the rear side access door while removing the rear side access door trim panel. Remove the upper latch rod retaining clip to disconnect it from the latch after which you can take out the bolts (1, 2) and remove the upper latch from the rear side access door. Install the upper latch on the rear side access door first then put only a loose grip on lower bolts for initial attachment. Secure the lower bolts until the latch bracket attaches to the door panel before attaching the upper latch rod with its respective retaining clips. aginiola close the rear side access door to achieve upper latch self-alignment before fully tightening the lower bolts to 9 N.m (80 lb in). View the rear side access door a second time to set and firmly tighten the upper latch bolt to 9 N.m (80 lb in). As a conclusion reinstall the rear side access door trim panel before closing the door.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the upper rear side access door latch assembly on GMC Canyon? Posted by Customer
    A:
    Begin the upper rear side access door latch installation by opening and removing the rear side access door trim panel from the door. The first step is to detach the upper latch rod from its position by removing the retaining clip before uninstalling bolts (1, 2) which secure the upper latch to the rear side access door. The upper latch should first be started on the rear side access door before lower bolts are loosely installed for basic latch security. Install the upper latch rod by connecting it with retaining clips when both lower bolts reach their final tightness stage and the latch bracket stands flush with the door panel. After closing the rear side access door the movement of the upper latch will automatically align while you continue tightening the lower bolts. After opening the rear side access door once more install the upper rear side access door upper latch bolt by adjusting the rods for simultaneous latch operation and secure with a torque of 9 Nm (80 lb in). Return the rear side access door trim panel and close the door.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Door Latch Assembly of the upper rear side access door on GMC Canyon? Posted by Customer
    A:
    The first step to replace the upper latch of the rear side access door begins with opening this door then removing the trim panel. To start the upper latch replacement process you should detach the upper latch rod from the latch by unstopping the retaining clip and after that remove the bolts 1 and 2 which secure the upper latch to the door and extract the upper latch. Put the upper latch on the rear side access door and loosely attach the lower bolts for attachment before final tightening. First secure the latch bracket against the door panel by tightening the lower bolts and after that attach the upper latch rod through the retention clips. People should finish tightening the lower bolts while the rear side access door remains closed for proper upper latch self-alignment. After setting upper latch bolts to 9 N.m (80 lb in) open the door to install the upper bolt while reinforcing it with the same torque specification. To finish the procedure you should replace the rear side access door trim panel while also closing the door.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step in the installation process for the 2009 Chevrolet Colorado? Posted by Customer
    A:
    Position the lower latch onto the rear side access door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    How do you disconnect the outside door handle and lock cylinder for the 2004 Chevrolet Colorado? Posted by Customer
    A:
    Disconnect the outside door handle rod and lock cylinder rod by releasing their respective retaining clips.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the torque specification for tightening the bolts for the 2008 Chevrolet Colorado? Posted by Customer
    A:
    Tighten the bolts to 9 N.m (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be removed after disconnecting the lower latch rod for the 2006 Chevrolet Colorado? Posted by Customer
    A:
    Remove the bolts and the nut that retain the lower latch to the rear side access door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    How do you disconnect the upper latch rod for the 2007 Chevrolet Colorado? Posted by Customer
    A:
    Disconnect the upper latch rod from the latch by releasing the retaining clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be removed after disconnecting the lower latch rod for the 2010 GMC Canyon? Posted by Customer
    A:
    Remove the bolts and the nut that retain the lower latch to the rear side access door, then take out the lower latch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should you do after connecting the upper latch rod for the 2005 GMC Canyon? Posted by Customer
    A:
    Close the door to self-align the latch and finish tightening the lower bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    How do you reconnect the lower latch rod for the 2007 GMC Canyon? Posted by Customer
    A:
    Reconnect the lower latch rod to the latch using the retaining clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the first step to replace the upper rear side access door latch for the 2009 GMC Canyon? Posted by Customer
    A:
    Open the rear side access door and remove the rear side access door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Lock Actuator, Rear Passenger Side 15918162 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15918162 Lock Actuator, Rear Passenger Side is available in the market under the name GM Door Lock, Door Lock Actuator, Door Latch Assembly. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15918162 Lock Actuator, Rear Passenger Side fits certain Chevrolet Colorado models, as well as GMC Canyon models.
The original GM component designated by manufacturer part number 15918162 maintains top performance when functioning as the Lock, Rear Side Door; Door Lock Actuator Motor; Door Latch Assembly; Door Lock unit at its Rear Passenger Side. The component 15918162 is constructed from durable material and its dimensions span 22.1 x 9.1 x 6.2 inches while weighing 1.90 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Lock; Lock, Door Lock. The part 15918162 has available replacement options 10395394. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.