Sierra 1500 | 2000-2007 | Base, C3, Denali, HT, Hybrid, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
Sierra 1500 Classic | 2007 | Hybrid, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
Sierra 2500 | 2000-2004 | Base, SL, SLE, SLT, WT | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
Sierra 2500 HD | 2001-2007 | Base, SL, SLE, SLT, WT | 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
Sierra 2500 HD Classic | 2007 | SL, SLE, SLT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
Sierra 3500 | 2001-2006 | Base, SL, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
Sierra 3500 Classic | 2007 | SL, SLE, SLT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
Sierra 3500 HD | 2007 | SLE, SLT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
Q: How to replace the rear side door check link on GMC Canyon?
A: The replacement process of the rear side Door Check starts with the removal of rear door trim panel then proceeds to the removal of rear inside Door Handle followed by the removal of rear door water deflector. Detach the bolt that fastens the rear Door Check to the body before removing the nuts that keep the check attached to the door. Remove the rear Door Check from the door after carefully extracting it from its position. You should install the new rear Door Check to the door by facing the alignment mark upward during positioning. The new check should receive its nuts before tightening them to 9 nm (80 lb in) while the bolt to the body requires a torque of 25 nm (18.4 lb ft). Installation of rear door water deflector must be followed by rear inside handle replacement and then installation of rear door trim panel.
Q: How to replace the front door check link on GMC Envoy?
A: You must begin the front door check replacement process by removing both the front door trim panels along with the front door water deflectors. The procedure starts by removing the bolt which fixes the front door check to the body before proceeding to loosen the nuts securing the check to the door then detach the check from the door. The new front door check installation requires positioning it against the door with the alignment mark at the top position. Hook the check to the door by installing and snug-tightening the nuts up to 9 N.m (80 lb in) before fastening the bolt that will connect the check to the body with 25 N.m (18.4 lb ft) torque. Complete the procedure by putting back on both the front door water deflector and the front door trim panel.
Q: How to replace the front side door check link on GMC Savana 2500?
A: The process starts with unhinging the front door trim panel and front door water deflector before moving to replace the front side door check. Start by removing the bolts from the door check where it joins the door jamb then proceed to separate the two nuts attaching the check to the door before taking out the door check. The first step for installation calls for connecting the door check to the door while keeping in mind the Fastener Notice instructions. First, clamp the door check with two nuts and tighten them to 11 N.m (97 lb in) before placing back the bolts to fasten the door check to the door jamb and torque them to 11 N.m (97 lb in). The final installation step includes putting back the front door water deflector together with the front door trim panel.