In order to replace the garnish molding on the side door lock pillar (CF5), remove front and rear door sill trim plates, upper, and lower front seat belt anchor bolts. Next, remove the front side door lock pillar garnish molding in the motor home, while passing the seat belt through. To install, position the front side door lock pillar garnish molding back onto vehicle, feeding seat belt once again. It is necessary to abide by the Fastener Notice in Service Precautions. Then, install the upper and lower front seat belt anchor bolts and tighten to 70 N.m (52 lb ft), and finally, attach the front and back doors sill trim plates.