Other Name: Lock, Rear Compartment Lid Or Tail Gate Latch; Trunk Latch; Door Lock; Latch; Lock, Rear Compartment Or Tailgate Lock Cylinder; Latch, Rear Compartment Lid Or Tail Gate Latch
Other Name: Actuator, Rear Compartment Lid Release; Tailgate Lock Motor; Trunk Lock Motor; Door Lock Motor.; Striker Actuator; Actuator
Position: Rear
Fits the following Buick Models:
Century | 1984-1996 | Custom, Estate Wagon, Limited, Special | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L DIESEL
Other Name: Lock, Rear Compartment Lid Or Tail Gate Latch; Door Lock; Lock; Lock, Rear Compartment Or Tail Gate Lock
Position: Rear
Fits the following Buick Models:
Century | 1984-1996 | Custom, Estate Wagon, Limited, Special | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L DIESEL
Q: How to replace the rear door lock actuator on Buick Century?
A: The first step to replace the rear Door Lock Actuator involves removing the rear Door Lock according to instructions. The first process involves unscrewing the securities joining the rear Door Lock to the rear Door Lock Actuator. The next step should involve removing the rear door actuator from the rear Door Lock. The installation process requires users to place the rear door actuator onto the rear Door Lock lignment followed by screwing and tightening to 2 n.m (18 lb in). The last step involves putting back the rear Door Lock.
Q: How to replace the front side door lock actuator on Buick Regal?
A: The replacement of front side Door Lock actuators requires starting with the removal of the front Door Lock. The front Door Lock requires removal of the screws which hold it to the front Door Lock Actuator. The procedure begins with separating the front door actuator from its position on the front Door Lock. Place the front door actuator onto the front Door Lock before securing it with screws which need to be tightened to 2 nm (18 lb in). The installation process ends with the front Door Lock reinstallation.
Q: How to replace the front door lock actuator on Buick Rainier?
A: Replacing the front Door Lock Actuator begins with trimming the door panel while you also remove the deflector and latch assembly. The two screws holding the actuator in place must be removed from the lock. Perform a smooth lift and rotation of the actuator which will detach the rubber Bumper from the latch before removing the actuator from its position. Start by placing the rubber Bumper on the latch and rotate the actuator toward the latch to complete the Bumper engagement. Fitting the first tooth of both gears precisely determines the success of the actuator-latch assembly. Strap the actuator to the latch before fastening it with the 2 screws while following the service precautions for fastener notice. Secure the screws to 0.75 n.m (6 lb in). The last step involves installing the lock panel together with the door deflector and the door trim.