Other Name: Actuator Assembly-Rear Side Door Latch Release; Door Lock Actuator Motor; Door Lock Actuator; Actuator; Actuator, Door Electric And Vacuum Locks; Actuator, Door And End Gate Electrical
Position: Rear Driver Side
Replaces: 19120851, 10324036
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2005-2007 Buick Terraza | CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
Other Name: Lock Assembly-Rear Side Door Front; Door Lock Actuator Motor; Door Latch Assembly; Door Lock Actuator; Door Lock; Lock; Latch, Door Lock Remote Control; Latch, Door Lock Remote
Other Name: Lock Assembly-Rear Side Door Front; Door Lock Actuator Motor; Door Latch Assembly; Door Lock Actuator; Door Lock; Lock; Latch, Door Lock Remote Control; Latch, Door Lock Remote
Other Name: Lock Assembly-Rear Side Door Rear; Door Latch Assembly; Door Lock; Latch; Lock, Rear Side Door; Lock, Door Lock
Position: Rear Passenger Side
Replaces: 10321723, 16675908
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2005-2007 Buick Terraza | CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
Buick Terraza Door Lock Actuator
Our website offers an extensive catalog of genuine Buick Terraza Door Lock Actuator at unbeatable prices. Every OEM Buick Terraza Door Lock Actuator comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Buick Terraza Door Lock Actuator Parts Questions & Experts Answers
Q: How to replace the front door lock actuator on Buick Terraza?
A: To get to the front door lock actuator, you should begin by taking off the front door module. After that, take off the electrical connectors from the front door lock actuator. Then remove the outside handle lock rod bracket and take out the screws holding the lock actuator in place. With the actuator removed, put the replacement front door lock actuator onto the front door lock and screw it in place, using only 2 N.m (18 lb in) of torque. After you are done with the actuator, put the outside handle lock rod bracket back, attach the electrical connectors, and then install the front door module.