Make sure this part fits

GM 10347138
Lock, Rear Driver Side

2001-2008 GM

Customer Questions & Expert Answers (14)
GM 10347138 Lock, Rear Driver Side
  • Part Description
    Lock Assembly-Rear Side Door Rear; Door Latch Assembly; Door Lock
  • Position
    Rear Driver Side
  • Replaces
    10321722
  • Manufacturer
    General Motors
Make sure this part fits
$159.42 MSRP: $238.35
You Save: $78.93 (34%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2007 Buick TerrazaCX, CXL6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2005-2008 Chevrolet UplanderBase, LS, LT6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2005 Chevrolet VentureLS, LT, Plus6 Cyl 3.4 L GAS
    2001-2004 Oldsmobile SilhouetteGL, GLS, Premiere6 Cyl 3.4 L GAS
    2005-2006 Pontiac MontanaBase, SV66 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    2005-2007 Saturn Relay1, 2, 36 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 10347138 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10347138 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after disconnecting the electrical connectors for the 2005 Buick Terraza? Posted by Customer
    A:
    Take off the front door outside handle lock rod bracket and remove the screws securing the front door lock actuator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be ensured during the installation of the latch for the 2007 Buick Terraza? Posted by Customer
    A:
    Follow the fastener notice and install the latch screws in sequence, tightening them to 10 N.m (89 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What components need to be reinstalled after the actuator is secured for the 2006 Buick Terraza? Posted by Customer
    A:
    The sliding door lock module, water deflector, and inner trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the final step after securing the actuator for the 2006 Buick Terraza? Posted by Customer
    A:
    Reinstall the outside handle lock rod bracket, reconnect the electrical connectors, and finally, reinstall the front door module.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be removed after disabling the PSD system for the 2007 Buick Terraza? Posted by Customer
    A:
    The sliding door inner trim panel, the sliding door water deflector, and the sliding door lock module.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    How should the sliding door latch screws be installed for the 2006 Buick Terraza? Posted by Customer
    A:
    Install the latch onto the door and tighten the screws in sequence to 10 N.m (89 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the next step after removing the fuse for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    Remove the sliding door inner trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    How do you remove the sliding door lock actuator for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    Carefully remove the sliding door lock actuator from the sliding door lock assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the next step after disabling the PSD system for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    Remove the sliding door inner trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What components need to be removed next for the 2005 Chevrolet Venture? Posted by Customer
    A:
    Take out the front door outside handle lock rod bracket and the screws securing the front door lock actuator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the first step to replace the lock actuator for the sliding door for the 2005 Chevrolet Uplander? Posted by Customer
    A:
    First, remove the sliding door lock and disconnect the electrical connector from the sliding door lock actuator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the first step to replace the sliding door lock actuator for the 2005 Chevrolet Venture? Posted by Customer
    A:
    First, remove the sliding door lock and disconnect the wiring harness connector from the sliding door lock actuator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    How do you install the new sliding door latch for the 2005 Chevrolet Venture? Posted by Customer
    A:
    Position the new sliding door latch onto the door and hook the latch/lock rod to it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Lock, Rear Driver Side 10347138 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 10347138 Lock, Rear Driver Side is available in the market under the name GM Door Lock, Door Lock Actuator, Door Latch Assembly. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 10347138 Lock, Rear Driver Side fits certain Chevrolet Uplander, Venture models, as well as Buick Terraza. Additionally, it is compatible with Pontiac Montana and Oldsmobile Silhouette models.
The original GM component designated by manufacturer part number 10347138 maintains top performance when functioning as the Lock Assembly-Rear Side Door Rear; Door Latch Assembly; Door Lock unit at its Rear Driver Side. The component 10347138 is constructed from durable material and its dimensions span 6.3 x 3.1 x 3.2 inches while weighing 1.00 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Latch; Lock, Rear Side Door; Lock, Door Lock. The part 10347138 has available replacement options 10321722. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.