Make sure this part fits

GM 25780730
Lock, Driver Side

1998-2008 GM

Customer Questions & Expert Answers (23)
GM 25780730 Lock, Driver Side
  • Part Description
    Lock Assembly-Rear Side Door Front; Door Latch Assembly; Door Lock
  • Position
    Driver Side
  • Replaces
    15130503
  • Manufacturer
    General Motors
Make sure this part fits
$218.02 MSRP: $325.95
You Save: $107.93 (34%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2007 Buick TerrazaCX, CXL6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2005-2008 Chevrolet UplanderBase, LS, LT6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    1998-2005 Chevrolet VentureBase, LS, LT, Plus, Value, Warner Bros.6 Cyl 3.4 L GAS
    1998-2004 Oldsmobile SilhouetteGL, GLS, GS, Premiere6 Cyl 3.4 L GAS
    1999-2006 Pontiac MontanaBase, SV66 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    1998 Pontiac Trans SportBase, Montana6 Cyl 3.4 L GAS
    2005-2007 Saturn Relay1, 2, 36 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25780730 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25780730 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How should the actuator be positioned during installation for the 2006 Buick Terraza? Posted by Customer
    A:
    Position the actuator onto the door and secure it with rivets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be done once the actuator is free for the 2006 Buick Terraza? Posted by Customer
    A:
    Position the new front door lock actuator to the front door lock and install the screws, tightening them to 2 N.m (18 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be removed after disabling the power sliding door system for the 2006 Buick Terraza? Posted by Customer
    A:
    Remove the sliding door inner trim panel and the sliding door water deflector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the first step in the installation process for the 2007 Buick Terraza? Posted by Customer
    A:
    Hook the latch/lock rod back to the sliding door latch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be done after disconnecting the electrical connectors for the 2005 Buick Terraza? Posted by Customer
    A:
    Take off the front door outside handle lock rod bracket and remove the screws securing the front door lock actuator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the first step to replace the Power Sliding Door Lock Actuator for the 2007 Buick Terraza? Posted by Customer
    A:
    Disable the PSD system by removing the PSD 15A fuse from the instrument panel fuse block.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the first step in the installation of the new sliding door lock actuator for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    Position the new sliding door lock actuator to the sliding door lock, ensuring the mounting holes are aligned.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the torque specification for tightening the screws for the 2004 Chevrolet Venture? Posted by Customer
    A:
    Tighten the screws to 10 N.m (89 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the first step in the installation process for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    Attach the actuator rod to the new latch release actuator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the first step to replace the lock actuator for the sliding door for the 2005 Chevrolet Uplander? Posted by Customer
    A:
    First, remove the sliding door lock and disconnect the electrical connector from the sliding door lock actuator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be done after disconnecting the wiring harness for the 2005 Chevrolet Venture? Posted by Customer
    A:
    Next, drill out the rivets securing the sliding door lock actuator and remove it from the sliding door lock.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the first step in the installation process for the 2001 Chevrolet Venture? Posted by Customer
    A:
    Position the front door lock to the front door lock module and secure it to the door lock module bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What are the final steps after securing the actuator for the 2002 Chevrolet Venture? Posted by Customer
    A:
    Reinstall the sliding door water deflector and the sliding door inner trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be done after removing the front door lock module for the 2002 Chevrolet Venture? Posted by Customer
    A:
    Disconnect the front door lock actuator electrical connectors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be followed during the installation for the 2001 Chevrolet Venture? Posted by Customer
    A:
    Ensure to follow the Fastener Notice in Service Precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the first step to replace the sliding door latch for the 2001 Chevrolet Venture? Posted by Customer
    A:
    First, remove the sliding door inner trim panel and the sliding door water deflector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What do you do after removing the front door lock for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Take out the lock actuator from the front door lock.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What do you do after removing the water deflector for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    Take out the sliding door latch screws and remove the latch from the sliding door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What are the last steps after installing the latch for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Reinstall the sliding door water deflector and the sliding door inner trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be done after removing the inner trim panel for the 2001 Chevrolet Venture? Posted by Customer
    A:
    Take out the sliding door water deflector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock
    Q:
    What is the next step after removing the latch screws for the 2005 Chevrolet Venture? Posted by Customer
    A:
    Unhook the latch/lock rod from the sliding door latch when it is loose, and remove the latch from the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the next step after removing the latch screws for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Unhook the lock rod from the sliding door rear lock once it is loose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Lock, Driver Side 25780730 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25780730 Lock, Driver Side is available in the market under the name GM Door Lock, Door Lock Actuator, Door Latch Assembly. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25780730 Lock, Driver Side fits certain Chevrolet Uplander, Venture models, as well as Buick Terraza. Additionally, it is compatible with Pontiac Montana, Trans Sport and Oldsmobile Silhouette models.
The original GM component designated by manufacturer part number 25780730 maintains top performance when functioning as the Lock Assembly-Rear Side Door Front; Door Latch Assembly; Door Lock unit at its Driver Side. The component 25780730 is constructed from durable material and its dimensions span 13.3 x 10.9 x 5.3 inches while weighing 3.20 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Latch, Door Lock Remote. The part 25780730 has available replacement options 15130503. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.