Other Name: Lock Assembly-Rear Side Door Front; Door Lock Actuator Motor; Door Latch Assembly; Door Lock Actuator; Door Lock; Lock; Latch, Door Lock Remote Control; Latch, Door Lock Remote
Other Name: Lock Assembly-Rear Side Door Front; Door Lock Actuator Motor; Door Latch Assembly; Door Lock Actuator; Door Lock; Lock; Latch, Door Lock Remote Control; Latch, Door Lock Remote
Other Name: Lock Assembly-Rear Side Door Rear; Door Latch Assembly; Door Lock; Latch; Lock, Rear Side Door; Lock, Door Lock
Position: Rear Passenger Side
Replaces: 10321723, 16675908
Item Weight: 1.00 Pounds
Item Dimensions: 6.4 x 3.3 x 3.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 10347139
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2000 Chevrolet Venture Submodels:
Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
2000 Chevrolet Venture Door Latch Assembly
With a comprehensive array of OEM 2000 Chevrolet Venture Door Latch Assembly, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Venture Door Latch Assembly are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2000 Chevrolet Venture Door Latch Assembly Parts Questions & Experts Answers
Q: How to replace the sliding Door Latch Assembly on 2000 Chevrolet Venture?
A: You need to eliminate the sliding door inner trim panel before reaching the sliding door water deflector in order to change the sliding door latch. After removing the sliding door latch screws you must unhook the latch/lock rod from its location within the sliding door latch and separate the latch from its position. Before installation position the new sliding door latch on the door while hooking the latch/lock rod into its designated position. Become familiar with the correct fastener tightening sequence at the time of sliding door latch screw installation until they reach 10 N.m (89 lb in). The last step involves reinstalling the sliding door water deflector with the sliding door inner trim panel.