Make sure this part fits

GM 25780729
Lock, Passenger Side

1998-2008 GM

Customer Questions & Expert Answers (21)
GM 25780729 Lock, Passenger Side
  • Part Description
    Lock Assembly-Rear Side Door Front; Door Latch Assembly; Door Lock
  • Position
    Passenger Side
  • Replaces
    15841658, 15130502
  • Manufacturer
    General Motors
Make sure this part fits
$169.38 MSRP: $244.47
You Save: $75.09 (31%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2007 Buick TerrazaCX, CXL6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2005-2008 Chevrolet UplanderBase, LS, LT6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    1998-2004 Chevrolet VentureBase, LS, LT, Plus, Value, Warner Bros.6 Cyl 3.4 L GAS
    1998-2004 Oldsmobile SilhouetteGL, GLS, GS, Premiere6 Cyl 3.4 L GAS
    1999-2006 Pontiac MontanaBase, SV66 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    1998 Pontiac Trans SportBase, Montana6 Cyl 3.4 L GAS
    2005-2007 Saturn Relay1, 2, 36 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25780729 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25780729 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What happens after reinstalling the PSD 15A fuse for the 2006 Buick Terraza? Posted by Customer
    A:
    It restores power to both PSDMs, making the PSDs operational, but both PSDMs will need to learn the full open and full closed positions of the PSD.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the next step after removing the trim panel and water deflector for the 2006 Buick Terraza? Posted by Customer
    A:
    Take out the sliding door latch screws and remove the latch from the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be done after removing the front door module for the 2006 Buick Terraza? Posted by Customer
    A:
    Disconnect the electrical connectors from the front door lock actuator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be secured after installing the rivets for the 2007 Buick Terraza? Posted by Customer
    A:
    Secure the actuator to the lock rod.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the final step to complete the process for the 2007 Buick Terraza? Posted by Customer
    A:
    Restore the low current logic power by reinstalling the PSD 15A fuse into the instrument panel fuse block.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the first step to replace the front door lock actuator for the 2002 Chevrolet Venture? Posted by Customer
    A:
    First, remove the front door lock module.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be done after disconnecting the electrical connectors for the 2005 Buick Terraza? Posted by Customer
    A:
    Take off the front door outside handle lock rod bracket and remove the screws securing the front door lock actuator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be done with the latch/lock rod for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Unhook the latch/lock rod from the sliding door latch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be removed after the inner trim panel for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    The sliding door water deflector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be done after disconnecting the electrical connector for the 2005 Chevrolet Uplander? Posted by Customer
    A:
    Next, drill out the rivets securing the sliding door lock actuator and remove it from the sliding door lock assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the next step after removing the screws for the 2001 Chevrolet Venture? Posted by Customer
    A:
    Remove the actuator itself and unhook the actuator rod from the actuator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be done after securing the front door lock for the 2001 Chevrolet Venture? Posted by Customer
    A:
    Reconnect the front door inside handle rods and reinstall the front door lock module.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the first step in the installation process for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Attach the lock actuator to the front door lock.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the next step after disconnecting the electrical connector for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    Drill out the rivets securing the actuator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What are the final steps after installing the rear lock for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Reinstall the sliding door water deflector and the sliding door inner trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock
    Q:
    What should be ensured during the installation of the latch for the 2001 Chevrolet Venture? Posted by Customer
    A:
    Follow the fastener notice and install the sliding door latch screws, tightening them to 10 N.m (89 lb in) in the specified sequence.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    How do you install the new actuator for the 2002 Chevrolet Venture? Posted by Customer
    A:
    First, attach the actuator rod to the new power sliding door latch release actuator, then install the actuator onto the power sliding door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the next step after securing the latch rod for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    Reinstall the sliding door water deflector and the sliding door inner trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the next step after removing the water deflector for the 2001 Chevrolet Venture? Posted by Customer
    A:
    Unscrew the sliding door latch screws.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock
    Q:
    What is the next step after removing the screws for the 2004 Chevrolet Venture? Posted by Customer
    A:
    Remove the actuator itself and unhook the actuator rod from the actuator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Lock, Passenger Side 25780729 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25780729 Lock, Passenger Side is available in the market under the name GM Door Lock, Door Lock Actuator, Door Latch Assembly. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25780729 Lock, Passenger Side fits certain Chevrolet Uplander, Venture models, as well as Buick Terraza. Additionally, it is compatible with Pontiac Montana, Trans Sport and Oldsmobile Silhouette models.
The original GM component designated by manufacturer part number 25780729 maintains top performance when functioning as the Lock Assembly-Rear Side Door Front; Door Latch Assembly; Door Lock unit at its Passenger Side. The component 25780729 is constructed from durable material and its dimensions span 13.3 x 11.1 x 5.5 inches while weighing 2.90 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Latch, Door Lock Remote. The part 25780729 has available replacement options 15841658, 15130502. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.