Other Name: Actuator Kit, Door Lock; Trunk Lock Actuator Motor; Door Lock Actuator; Lock Actuator; Electric and Vacuum Door Locks; End Gate Electrical Actuator Kit.
Other Name: Actuator Kit, Door Lock; Door Lock Actuator; Lock Actuator; Actuator; Actuator Kit, Door Electric And Vacuum Locks; Actuator Kit, Door And End Gate Electrical
Other Name: Lock Assembly-Rear Side Door Front; Door Lock Actuator Motor; Door Latch Assembly; Door Lock Actuator; Door Lock; Lock; Latch, Door Lock Remote Control; Latch, Door Lock Remote
Other Name: Lock Assembly-Rear Side Door Front; Door Lock Actuator Motor; Door Latch Assembly; Door Lock Actuator; Door Lock; Lock; Latch, Door Lock Remote Control; Latch, Door Lock Remote
Other Name: Actuator, Door Electric And Vacuum Locks; Door Lock Actuator Motor; Door Lock Actuator
Position: Driver Side
Replaces: 12362543
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1997 Chevrolet Venture | Base, LS | 6 Cyl 3.4 L GAS
| Page 1 of 2 |Next >
1-20 of 25 Results
Chevrolet Venture Door Lock
Our website offers an extensive catalog of genuine Chevrolet Venture Door Lock at unbeatable prices. Every OEM Chevrolet Venture Door Lock comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet Venture Door Lock Parts Questions & Experts Answers
Q: How to replace the rear sliding door lock on Chevrolet Venture?
A: The process of replacing the sliding door rear lock requires beginning with inner sliding door trim removal and sliding door water deflector removal. The second step requires removing the sliding door water deflector. Next remove the sliding door latch screws before unhooking the lock rod from the sliding door rear lock. Take out the sliding door rear lock from the rear sliding door. Place the sliding door rear lock onto the correct position of the sliding door before connecting the lock rod to it. Follow the specified tightener sequence and secure the sliding door rear lock screws to 10 N.m (89 lb in). Put back the sliding door water deflector followed by replacing the sliding door inner trim panel.