Make sure this part fits

GM 88981044
Lock

1997-2008 GM

Customer Questions & Expert Answers (21)
GM 88981044 Lock
  • Part Description
    Lock, Front Side Door; Door Lock
  • Position
    Front
  • Replaces
    16636574
  • Manufacturer
    General Motors
Make sure this part fits
$142.75 MSRP: $213.43
You Save: $70.68 (34%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2007 Buick TerrazaCX, CXL6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2005-2008 Chevrolet UplanderBase, LS, LT6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    1997-2004 Chevrolet VentureBase, LS, LT, Plus, Value, Warner Bros.6 Cyl 3.4 L GAS
    1997-2004 Oldsmobile SilhouetteBase, GL, GLS, GS, Premiere6 Cyl 3.4 L GAS
    1999-2006 Pontiac MontanaBase, SV66 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    1997-1998 Pontiac Trans SportBase, Montana6 Cyl 3.4 L GAS
    2005-2007 Saturn Relay1, 2, 36 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is 88981044 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 88981044 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done once the actuator is free for the 2006 Buick Terraza? Posted by Customer
    A:
    Position the new front door lock actuator to the front door lock and install the screws, tightening them to 2 N.m (18 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What needs to be disconnected next for the 2006 Buick Terraza? Posted by Customer
    A:
    The power sliding door latch release actuator electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the final step in the process for the 2005 Buick Terraza? Posted by Customer
    A:
    Reinstall the front door module.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    How do you disable the power sliding door system for the 2006 Buick Terraza? Posted by Customer
    A:
    Remove the PSD 15A fuse from the instrument panel fuse block.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What happens after restoring the fuse for the 2007 Buick Terraza? Posted by Customer
    A:
    Both power sliding doors become operational, although both modules will need to learn the full open and closed positions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the final step in the process for the 2007 Buick Terraza? Posted by Customer
    A:
    Restore the low current logic power by reinstalling the PSD 15A fuse into the instrument panel fuse block.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be done after removing the front door lock module for the 2002 Chevrolet Venture? Posted by Customer
    A:
    Disconnect the front door lock actuator electrical connectors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the first step to replace the power sliding door lock actuator for the 2004 Chevrolet Venture? Posted by Customer
    A:
    Begin by removing the sliding door inner trim panel and the water deflector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be done after removing the inner trim panel and water deflector for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Take out the sliding door latch screws.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock
    Q:
    What should be followed during the installation for the 2001 Chevrolet Venture? Posted by Customer
    A:
    Ensure to follow the Fastener Notice in Service Precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What does reinstalling the fuse do for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    It reactivates the low current logic power to both PSDMs, allowing them to learn the full open and closed positions of the PSD.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be done after securing the front door lock for the 2001 Chevrolet Venture? Posted by Customer
    A:
    Reconnect the front door inside handle rods and reinstall the front door lock module.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    How do you install the new actuator for the 2002 Chevrolet Venture? Posted by Customer
    A:
    First, attach the actuator rod to the new power sliding door latch release actuator, then install the actuator onto the power sliding door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be ensured during the installation for the 2001 Chevrolet Venture? Posted by Customer
    A:
    Follow the fastener tightening sequence and tighten the sliding door rear lock screws to 10 N.m (89 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock
    Q:
    What do you do after removing the front door lock for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Take out the lock actuator from the front door lock.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the final step in the replacement process for the 2005 Chevrolet Uplander? Posted by Customer
    A:
    Finally, connect the electrical connector to the sliding door lock actuator and reinstall the sliding door lock.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the first step to replace the sliding door latch for the 2000 Chevrolet Venture? Posted by Customer
    A:
    First, remove the sliding door inner trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be done after securing the actuator for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    Reconnect the electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    How do you install the new latch for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    Hook the latch/lock rod back to the sliding door latch and install the latch onto the sliding door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be done after removing the inner trim panel and water deflector for the 2001 Chevrolet Venture? Posted by Customer
    A:
    Take out the sliding door latch screws.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Lock 88981044 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 88981044 Lock is available in the market under the name GM Door Lock, Door Lock Actuator, Door Latch Assembly. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 88981044 Lock fits certain Chevrolet Uplander, Venture models, as well as Buick Terraza. Additionally, it is compatible with Pontiac Montana, Trans Sport and Oldsmobile Silhouette models.
The original GM component designated by manufacturer part number 88981044 maintains top performance when functioning as the Lock, Front Side Door; Door Lock unit at its Front. The component 88981044 is constructed from durable material and its dimensions span 6.6 x 4.1 x 4.3 inches while weighing 1.10 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Lock, Door Lock. The part 88981044 has available replacement options 16636574. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.